Abstract:By changing the placement angle of the placement path, the fiber direction can be controlled and adjusted to change the load distribution in the laminate, and the stress and natural frequency performances of the laminate can then be altered to finally obtain laminates with desired mechanical properties. In this paper, the finite element analysis model of variable-stiffness laminates is established based on the fiber placement reference path defined by the Bezier curve method. Based on the analysis of the mechanical properties of the thermoplastic fiber variable-angle laminates obtained by variable-angle trajectory planning, the changes in the stress and deformation of the thermoplastic fiber variable-angle laminate with the connection point parameter beta under a compressive load are analyzed. The influence of the parameter beta on the static performances of the variable-angle laminates is studied. The simulation results indicate that the maximum stress of the laminate increases first and then decreases as the parameter beta increases and reaches the maximum value when the parameter beta is 0.5. The minimum stress also shows the same trend as that of the maximum stress and reaches the minimum value when the connection point parameter beta is 0.3. The deformation of the variable-angle laminates varies with the change of the connection point parameter beta. The maximum deformation increases at first and then decreases for the laminate with the parameter beta increasing and reaches the maximum value when the parameter beta is 0.8. The minimum deformation of the laminate decreases initially and then increases as the connection point parameter beta increases and reaches the minimum value when the parameter beta is 0.6. The deformation gradually decreases from the upper and lower ends to the middle, and the deformation area has a symmetrical form. The initial regular rectangular area gradually changes to an elliptical distribution and the area of maximum deformation gradually decreases.

Numerical simulation and experiment validation of variable stiffness composite laminates with open holes under unidirectional tension

Strain Concentrations and Progressive Damage Analysis of Notched Composite Laminates

Tensile Progressive Damage and Compressive Postbuckling Analysis of Open-Hole Laminate Composites

Study on Mechanical Behaviors of Variable-Stiffness Composite Laminates

Computational modelling of postbuckling behavior of composite T-stiffened panels with different bonding methods

Damage Analysis of Composite Laminate with Large Open-hole under Compression Using 3D Strain Progressive Damage Theory

Mechanical simulation of open hole compressive behavior for high-modulus and high-strength composite laminates

Numerical Study for Damage of Carbon Fiber Reinforced Resin Matrix Laminates Related to Strain Rates

Simulation on damage in quasi-isotropic fiber-reinforced composite laminates under open-hole tension

Multi-scale analysis of effects of constituent properties on open-hole tension performance of composite laminates

Open-Hole Strengthening for Composite Laminate Stability under Compression

Numerical study on failure behavior of open-hole composite laminates based on LaRC criterion and extended finite element method

A comparative study on failure mechanisms of open-hole and filled-hole composite laminates: Experiment and numerical simulation

Mechanical Simulation of Thermoplastic Composite Fiber Variable-Angle Laminates

Experimental and Numerical Investigation of Open Hole Carbon Fiber Composite Laminates under Compression with Three Different Stacking Sequences

Progressive Damage Analysis and Experiments of Open-Hole Composite Laminates Subjected to Compression Loads

Failure analysis and experimental study on bolted composite joints based on continuum damage mechanics

Tensile Mechanical Behavior and Failure Mechanisms of Multihole Fiber Metal Laminates—experimental Characterization and Numerical Prediction

Progressive Failure Analysis on Scaled Open-Hole Tensile Composite Laminates

Numerical Modeling on Load Bearing and Bypass Behavior of Bolted Single Lap Joints of Laminates

Progressive Damage Based Failure Analysis of Open-hole Composite Laminates under Tension