Abstract:Carbon-fiber reinforced composites are made up of three different phases. Tensile or compressive deformation in the longitudinal (fiber) orientation is controlled by the fibers, leading to a linear stress strain response which ends abruptly when the fibers fail by tensile fracture or kinking in compression. Conversely, major non-linear deformations can develop under transverse compression or in-plane shear because deformation is controlled by the polymeric matrix and the interphase.In this paper, first the V-notched rail shear test was used to research the mechanical properties of composite under in-plane shear loading, and the fracture surfaces of failed specimens were examined using scanning electron microscopy (SEM). The broken samples showed a large residual shear displacement. For [0/90](8s) cross-ply laminate V-notched beam test, the failure mode is the interactions of intralaminar and interlaminar failure. The intralaminar interfacial debonding, matrix cracking and interlaminar degradation occurs in succession. Then a representative volume element (RVE) of fiber random distribution was established, with two dominant damage mechanisms-matrix plastic deformation and interfacial debonding included in the simulation by the extended Drucker-Prager model and cohesive zone model respectively. The simulation results clearly reveal the damage process of the composites and the interactions of different damage mechanisms. It can be concluded that the in-plane shear fracture initiates as interfacial debonding and evolves as a result of interactions between interfacial debonding and matrix plastic deformation. The progressive damage process and final failure mode of in-plane shear model which are based on constitute are very consistent with the observed result under SEM of V-notched rail shear test. Also a transverse shear model was established as contrast in order to comprehensively understand the mechanical properties of composite materials under shear loading, and the progressive damage process and final failure mode of composite under transverse shear loading were researched.

Experiment Study of Stiffness Degradation for Damaged Composite Laminates

Numerical simulation and experiment validation of variable stiffness composite laminates with open holes under unidirectional tension

Experimental and Numerical Study on Failure Behaviors of Composite Grid Stiffeners under Tensile and Flexural Loading

Microscopic Progressive Damage And Failure Analysis Of Carbon-Fiber Reinforced Composite Under Shear Loading

A Study on the Intralaminar Damage and Interlaminar Delamination of Carbon Fiber Composite Laminates under Three-Point Bending Using Acoustic Emission

Numerical and Experimental Analysis of Delamination in the T-Stiffener Integrated Composite Structure

Failure analysis and experimental study on bolted composite joints based on continuum damage mechanics

Characterization of progressive damage behaviour and failure mechanism of carbon fibre reinforced DP590 laminates

Experimental and numerical investigation of damage evolution in carbon fiber reinforced polymer stiffened panel in post-buckling regime

Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact

Experimental Data on Fracture of Open-Hole Composite Laminates Subjected to Tension Loading

High-fidelity Simulations of Multiple Fracture Processes in a Laminated Composite in Tension

Comparison on mechanical properties, damage evolution and aging effects of multi-delaminated composites under three point bending

Experimental and numerical simulation study on Near-edge/On-edge Low-Velocity impact and residual compressive strength of T300/69 laminates

Progressive damage and stiffness degradation assessments of double‐lap CFRP/Ti interference fit bolted joints under quasi‐static tensile load

NUMERICAL SIMULATION OF STIFFNESS DEGRADATION MODEL FOR FIBER-WINDING COMPOSITE PRESSURE VESSELS

Investigation of the out-of-plane load-bearing capacity of T1100/5405 composite T-stiffened panels

Experimental Study on the Mechanical Behavior and Failure Mechanism of 3d MWK Carbon/epoxy Composites under Quasi-Static Loading

Review On Methodologies Of Progressive Failure Analysis Of Composite Laminates

Flexural progressive damage and failure behavior of carbon-aramid/epoxy hybrid woven composites

Failure behavior and damage visualization of thick carbon/aramid hybrid woven composites under flexural loading conditions