Abstract:Carbon-fiber reinforced composites are made up of three different phases. Tensile or compressive deformation in the longitudinal (fiber) orientation is controlled by the fibers, leading to a linear stress strain response which ends abruptly when the fibers fail by tensile fracture or kinking in compression. Conversely, major non-linear deformations can develop under transverse compression or in-plane shear because deformation is controlled by the polymeric matrix and the interphase.In this paper, first the V-notched rail shear test was used to research the mechanical properties of composite under in-plane shear loading, and the fracture surfaces of failed specimens were examined using scanning electron microscopy (SEM). The broken samples showed a large residual shear displacement. For [0/90](8s) cross-ply laminate V-notched beam test, the failure mode is the interactions of intralaminar and interlaminar failure. The intralaminar interfacial debonding, matrix cracking and interlaminar degradation occurs in succession. Then a representative volume element (RVE) of fiber random distribution was established, with two dominant damage mechanisms-matrix plastic deformation and interfacial debonding included in the simulation by the extended Drucker-Prager model and cohesive zone model respectively. The simulation results clearly reveal the damage process of the composites and the interactions of different damage mechanisms. It can be concluded that the in-plane shear fracture initiates as interfacial debonding and evolves as a result of interactions between interfacial debonding and matrix plastic deformation. The progressive damage process and final failure mode of in-plane shear model which are based on constitute are very consistent with the observed result under SEM of V-notched rail shear test. Also a transverse shear model was established as contrast in order to comprehensively understand the mechanical properties of composite materials under shear loading, and the progressive damage process and final failure mode of composite under transverse shear loading were researched.

Experimental Study on the Mechanical Behavior and Failure Mechanism of 3d MWK Carbon/epoxy Composites under Quasi-Static Loading

Progressive failure analysis of 2D woven composites at the meso-micro scale

High-Strain-Rate Compression Behavior and Failure Mechanism of 3d Mwk Carbon/Epoxy Composites

Experimental investigation on mechanical response and failure analysis of 3D multi-axial warp knitted hybrid composites

Micromechanics-based Progressive Failure Analysis of Carbon FIber/epoxy Composite Vessel under Combined Internal Pressure and Thermomechanical Loading

Mechanical Properties Testing and Failure Mechanism Analysis of 3D Woven Carbon/epoxy Composites

Mechanical Behavior and Failure Mode of Woven Carbon/epoxy Laminate Composites under Dynamic Compressive Loading

Experimental and numerical study of in-plane compressive properties and failure of 3D six-directional braided composites with large braiding angle

Meso-scale modeling and damage analysis of carbon/epoxy woven fabric composite under in-plane tension and compression loadings

X-ray microtomography analysis of the damage mechanisms in 3D circular braided carbon fiber/epoxy resin composite tubes under axial impact compression

Split Hopkinson pressure bar testing of 3D multi-axial warp knitted carbon/epoxy composites

Experimental characterization of failure behaviour for three-dimensional woven carbon/carbon composites under pin-loading

Microscopic Progressive Damage And Failure Analysis Of Carbon-Fiber Reinforced Composite Under Shear Loading

Experimental study on the fabrication, high-temperature properties and failure analysis of 3D seven-directional braided composites under compression

Failure behavior and damage visualization of thick carbon/aramid hybrid woven composites under flexural loading conditions

Mechanical-electrical coupling behaviors of 3-D carbon fiber angle-interlock woven composites under quasi-static and cyclic tension

3D Orthogonal Woven Carbon/Carbon Composites: Micromechanical Modeling and Damage Analysis

A new progressive damage model for predicting the tensile behavior of the three-dimensional woven carbon/carbon composites using micromechanics method

Progressive damage modelling and experimental investigation of three-dimensional orthogonal woven composites with tilted binder

Multiaxial failure mechanism of 3D triple-twill warp-lining woven composites

Short Beam Shear Behavior and Failure Characterization of Hybrid 3D Braided Composites Structure with X-ray Micro-Computed Tomography