Abstract:This paper aims to study the mechanical behavior and the complicated failure mechanism of a novel Al matrix composites reinforced with 3D orthogonal woven carbon fiber. The quasi-static tensile behavior, local stress response and progressive failure process are investigated via numerical and experimental approach. According to the microstructure at fiber and yarn scale, microscopic and mesoscopic finite element models were established to carry out multiscale simulation. The calculated tensile stress-strain curve is basically in accordance with the experimental curves, where the elastic moduli, tensile strength, and elongation are 118.6 GPa, 777.3 MPa and 0.84%, respectively. Local stress distribution of the matrix pocket and yarns exhibits apparent periodicity and heterogeneity, which is related to the specific fabric architecture. Interface debonding induces the local damage of matrix alloy and transverse cracking of binder and weft yarns successively, resulting in nonlinear response of the tensile curves. The catastrophic rupture of the composites is caused by the axial fracture of warp yarns that resulted from the combination of matrix failure and transverse yarns cracking. The fracture morphology of binder and weft yarns is flat and that of warp yarns exhibits limited fiber pull-out, which can be interpreted by the predicted failure mode. Based on the validated model, the influence of fabric structure parameters on the macroscopic properties was further evaluated. The results indicate that the increase of warp or weft density could improve the tensile strength and elastic modulus, but the tensile elongation decreases with the increase of weft density.

Multiaxial failure mechanism of 3D triple-twill warp-lining woven composites

Experimental Characterization of the Compressive Properties and Failure Mechanism of Novel Multiaxial 3D Woven Composites

A Combined Experimental and Numerical Approach to Investigate the Failure Behaviors of 3D Woven Composites under Biaxial Tensile Loading

Effect of Bias Yarn on Tensile Fracture Mechanism of Multiaxial 3D Angle-Interlock Woven Composites

Multiscale Modeling of Mechanical Behavior and Failure Mechanism of 3D Angle-Interlock Woven Aluminum Composites Subjected to Warp/weft Directional Tension Loading

Experiment investigation on biaxial tensile strength of 3D in-plane braided C/C composites

Experimental Study on the Tension Fatigue Behavior and Failure Mechanism of 3D Multi-Axial Warp Knitted Composites

Failure Analysis of 3D Woven Composites under Tension Based on Realistic Model

Experimental investigation on mechanical response and failure analysis of 3D multi-axial warp knitted hybrid composites

Tensile Behavior and Failure Mechanism of 3D Woven Fabric Reinforced Aluminum Composites

Failure Mode of Load-bearing Joints in Three-dimensional Braided Composites

Experimental Study on the Mechanical Behavior and Failure Mechanism of 3d MWK Carbon/epoxy Composites under Quasi-Static Loading

Progressive damage and failure analysis of three-dimensional braided composites subjected to biaxial tension and compression

Progressive damage modelling and experimental investigation of three-dimensional orthogonal woven composites with tilted binder

Multi-directional compression behaviors and failure mechanisms of 3D orthogonal woven composites: Parametric modeling and strength prediction

Tensile and Compressive Failure Behaviors of Triaxially Braided Composite

Numerical Investigation on Tensile Behavior of Three-Dimensional Six-Directional Braided Composites

Modeling the transverse tensile and compressive failure behavior of triaxially braided composites

Experimental and Numerical Investigation of Open-Hole Tensile Properties and Damage Mechanisms of 3D Woven Composites under Weft-Loading

Investigation on the Tensile Properties of Three-Dimensional Full Five-Directional Braided Composites

Numerical investigation of tensile behavior of three-dimensional six-directional braided composites