Abstract:Dynamic characterization of textile composites is confronted with great challenges due to its large unit-cell size and the inherent limitations in specimen size for the Hopkinson bar-based test system. The small specimen size will inevitably introduce variations in effective mechanical response and failure mechanism, and bring about additional problems in determining the realistic dynamic properties of the material. This work experimentally investigated the dynamic compression behavior of three-dimensional angle interlock woven composite (3DWC) using the split Hopkinson pressure bar (SHPB). Specimens with different sizes were designed to explore the size dependency, strain-rate dependency and orientation dependency for the compressive behavior of the 3DWC. A high-speed camera and an optical microscope were introduced to elaborate on the damage progressing process and fracture morphology under diff0erent loading conditions. With an increase in strain rate, the measured strength of warp-direction specimens increased by approximately 7%, 6%, and 2.4% for three different sizes of specimens, accompanied by more severe intra-tow damage. Different-sized dynamic specimens exhibited comparable failure processes but modest variations in measured properties. When the number of unit cells in a specimen increased from two to three and four, the strength was observed to rise by around 21% and 26.3% respectively. In comparison to the warp-direction specimen, the weft-direction specimens exhibited substantially higher strength and failure strain, as well as distinct dominant failure modes of yarns. This work provides valuable insights into the determination of dynamic properties for 3D woven composites, and the designing and interpretation of dynamic test methods.

Off-axial Angle Sensitivity of 3D Orthogonal Woven Composite Failure Behavior Subjected to In-Plane Compressive Loading

Analysis of in-plane compression failure mechanism in carbon fiber braided composite with different off-axial angles

Multi-directional compression behaviors and failure mechanisms of 3D orthogonal woven composites: Parametric modeling and strength prediction

The Effect of Off-Axis Angles on the Mesoscale Deformation Response and Failure Behavior of an Orthotropic Textile Carbon-Epoxy Composite

Characterization of Failure Behavior in Unidirectional Fiber-Reinforced Polymer Via Off-Axis Compression on Small Block Specimens.

Anisotropic failure analysis of 2.5-D braided composites under compression

Experimental and Numerical Analyses of the Mechanical Behaviors of Three-Dimensional Orthogonal Woven Composites under Compressive Loadings with Different Strain Rates

CCCs off-axial orientation sensitivity analysis in hole pin-bearing failure via hierarchical multiscale simulation framework

Size-dependent mechanical behaviors of 3D woven composite under high strain-rate compression loads

Experimental Characterization of the Compressive Properties and Failure Mechanism of Novel Multiaxial 3D Woven Composites

Investigation on the off-axis tensile failure behaviors of 3D woven composites through a coupled numerical-experimental approach

Theoretical Prediction and Validation of Mechanical Properties and Damage of 3D Orthogonal Woven Composites with Different Parameters

Progressive damage modelling and experimental investigation of three-dimensional orthogonal woven composites with tilted binder

Meso-Scale Damage Modeling of Hybrid 3D Woven Orthogonal Composites under Uni-Axial Compression

Influence of Asymmetric Hybridization on Impact Response of 3D Orthogonal Woven Composites

Revealing the Failure Mechanism of 2D Triaxially Braided Composites under Off-Axial Tension Through Mesoscale Simulations

Multiscale Modeling of Mechanical Behavior and Failure Mechanism of 3D Angle-Interlock Woven Aluminum Composites Subjected to Warp/weft Directional Tension Loading

Experimental investigation on mechanical response and failure analysis of 3D multi-axial warp knitted hybrid composites

Evaluation of multi-directional compression behaviors and failure of three-dimensional orthogonal woven composites via liquid nitrogen temperature

Impact Response of 3D Orthogonal Woven Composites with Different Fiber Types

Experimental and numerical validation of high strain rate impact response and progressive damage of 3D orthogonal woven composites