Abstract:To prevent the failure of membrane structures due to excessive loads, the tearing properties of such structures with coated fabrics were investigated in this study. First, the material properties were obtained by conducting tensile, shear, and single-edge notched tests. Thereafter, a structure tearing test was designed and conducted. Test models with different cracks exhibited similar load–displacement of actuator curves, and the critical tearing loads decreased with increasing in crack sizes. However, the decreasing trend gradually declined. Different test models exhibited similar crack expansion processes before the initiation of tearing. After tearing initiated, the crack extension speed and failure mode varied. Based on the displacement results around the crack, the influence of the crack was local before tearing initiated. However, the crack size can determine the timing and mode of the failure of membrane structures. Furthermore, by comparing the tearing test results at the structure and material levels, the crack size and critical tearing strength per unit length were verified as critical parameters for determining a relatively complete tearing mechanism. Finally, due to the differences between the structure tearing and single-edge notched tests, a stress analysis was conducted to confirm the detailed margins/limitations based on a numerical simulation. The critical tearing strength at the crack section was obtained, and the theoretical critical tearing loads were obtained based on the modified stress field model. The results related to the single-edge notched test were smaller, and can therefore provide a relatively safe estimation with respect to the membrane structure tearing test. This study was preliminary, and can serve as a basis for investigating the tearing of membrane structures.

Off-axis tearing properties of the biaxial warp-knitted fabrics

Experimental studies on tear failure of PVC coated fabric

Mechanical properties analysis of architectural PVDF/PES fabrics with uni-tensile and bi-axial test

Off-axial Angle Sensitivity of 3D Orthogonal Woven Composite Failure Behavior Subjected to In-Plane Compressive Loading

Multiaxial failure mechanism of 3D triple-twill warp-lining woven composites

Analytical solutions for pore size of nonwoven geotextiles under unequal biaxial tensile strain

Experimental study on pore sizecharacteristics of wovengeotextiles subjected to unequal biaxial tensilestrains

Effect of crossing warp architecture on tear strength of 3D orthogonal woven T-shaped reinforcements

Experimental and numerical research of temperature on tensile properties of multiaxial warp‐knitted composites

Analysis of in-plane compression failure mechanism in carbon fiber braided composite with different off-axial angles

Mechanical Responses and Damage Morphology of Laminated Fabrics with a Central Slit under Uniaxial Tension: A Comparison Between Analytical and Experimental Results

Exploring in-plane shear characteristics of multilayer biaxial weft knitted fabrics through a micro-scale virtual fiber modeling

Effects of fabric architectures on mechanical and damage behaviors in carbon/epoxy woven composites under multiaxial stress states

Central tearing behavior of PVDF coated fabrics with multiple initial notches

Experimental characterization and numerical analysis of 3D woven preforms torsional deformation

Anisotropic failure analysis of 2.5-D braided composites under compression

Tearing behaviors of coated fabric membrane structures

Experimental investigation on the effects of fabric architectures on mechanical and damage behaviors of carbon/epoxy woven composites

Study on tensile performance of welded seams of PVC coated fabric membrane under uniaxial cyclic load

Study on Mechanical Properties of High Performance Envelope Materials

Experimental investigation on mechanical response and failure analysis of 3D multi-axial warp knitted hybrid composites