Abstract:Experimental method and results. Coated fabric is a composite textile consisting of fiber‐based cloth and surface coating. It features advantages such as lightweight, high strength, and multifunctionality, making it highly popular in architectural membrane structures. However, conventional coated fabrics have been facing bottlenecks such as short service life, difficult maintenance, and low dimensional stability. This paper introduces an innovative high‐performance PVC coated polyester named Flexlight Xtrem TX30, which possesses excellent longevity and durable aesthetics. The uniaxial tensile properties of three types of TX30 polyesters in the warp, weft, and 45° directions were comprehensively revealed through monotonic and cyclic tests. First, mono‐uniaxial tensile tests were performed on six specimens for each case. The failure characteristics were observed and strength at different angles was determined. Benefiting from the precontraint technology, the difference in strength between the warp and weft directions for TX30 is less than 5%. Second, uniaxial cyclic tensile tests were conducted on four specimens for each case. The initial tensile behavior exhibited the highest nonlinearity, with an R‐squared value greater than 0.999 for the cubic stress–strain relation. By the 15th cycle, the stiffness increment for all cases is less than 1%, indicating the attainment of material stabilization. Additionally, ratcheting effect and hysteresis loops were observed during the tests. The ratcheting strain and dissipated energy across different cases were thoroughly discussed and compared. In general, the experimental investigations in this study facilitate the understanding of the mechanical characteristics of the novel TX30 polyesters, providing insights for engineering applications and academic research. Highlights The uniaxial tensile properties of innovative TX30 polyesters were investigated. The failure mechanism and tensile strength at different angles were identified. The nonlinear stress–strain relations and cyclic material behaviors were determined.

Experimental studies on tear failure of PVC coated fabric

Experiments on the mechanical properties and the welded seam properties of architectural membranes

Experiments on Welded Seam Performances of C-type Fabric Membrane(PVC/PES)

Mechanical properties analysis of architectural PVDF/PES fabrics with uni-tensile and bi-axial test

Tearing behaviors of coated fabric membrane structures

Central tearing behavior of PVDF coated fabrics with multiple initial notches

Study on Central Tearing Properties of Kapton Membrane

Study on tensile performance of welded seams of PVC coated fabric membrane under uniaxial cyclic load

Mechanical Responses and Damage Morphology of Laminated Fabrics with a Central Slit under Uniaxial Tension: A Comparison Between Analytical and Experimental Results

Effect of the viscosity of polyvinyl chloride resin and weaving structures of polyester fabric on the off-axis mechanical properties of PVC coated fabric

Off-axis tearing properties of the biaxial warp-knitted fabrics

Effects of Fabric Weave on the Architecture Coated Fabric Properties

Degradation of PVDF-Coated Fabrics after Engineering Applications: Correlations between Surface Microstructure, Physical Properties, and Mechanical Properties Based on Statistical Analysis

Artificial Weathering Mechanisms of Uncoated Structural Polyethylene Terephthalate Fabrics with Focus on Tensile Strength Degradation

Relationship between physical and mechanical properties of accelerated weathering and outdoor weathering of PVC-coated membrane material under tensile stress

Fabrication, mechanical properties and failure mechanism of random and aligned nanofiber membrane with different parameters

Advances in mechanical properties of coated fabrics in civil engineering

Effect of Microcracks on the Tensile Properties of 3D Woven Composites

Study on Mechanical Properties of High Performance Envelope Materials

Numerical Simulation Study of the T-Peel Behavior of Coated Fabric Films Used in Inflatable Structures

Experimental characterization for uniaxial tensile properties of high‐performance TX30 polyesters