Abstract:The use of enhanced plain woven fabrics for aerospace engineering needs essential and accurate mechanical parameters for analyzing structural behavior and performing numerical simulations. The uniaxial tensile tests are direct and effective approaches to investigate these mechanical properties. This study focused on uniaxial monotonic and cyclic mechanical properties of an enhanced plain woven fabrics URETEK 5893 in on-axis and off-axis tension. For uniaxial monotonic mechanical properties, an improved method to determine yield stress was proposed and digital image correlation (DIC) technique was utilized to investigate detailed breaking mechanism. It is found that yield stresses were stable in each loading direction and typical yield stresses in the warp, weft and 45 degrees directions were 5.56 MPa, 8.84 MPa and 1.96 MPa, respectively. Moreover, the breaking mechanism in terms of strain propagation process was identified. For cyclic mechanical properties, approximate stable ratcheting strain and elastic modulus were investigated. Nonlinear ratcheting strain was more sensitive near 45 degrees than other directions. Moreover, Poisson ratios in three directions were obtained with DIC technique and the maximum Poisson ratio existed in the 45 direction. The comparisons between experimental and theoretical elastic moduli showed that the best agreement existed in the warp and weft directions and the accuracy of using the theoretical equation to calculate elastic modulus was dependent on material linearity.In general, this study could provide basic observations and useful values for understanding mechanical properties of plain woven fabrics in use for inflated membrane structures. (C) 2017 Elsevier Ltd. All rights reserved.

Advances in mechanical properties of coated fabrics in civil engineering

Mechanical properties analysis of architectural PVDF/PES fabrics with uni-tensile and bi-axial test

Experiments on the mechanical properties and the welded seam properties of architectural membranes

Experiments on Welded Seam Performances of C-type Fabric Membrane(PVC/PES)

Experimental studies on tear failure of PVC coated fabric

Performance and Measurement Devices for Membrane Buildings in Civil Engineering: A Review

Effects of Structural Parameters on the Thermal Insulation Properties of Coated Carbon Fiber Fabrics

Effects of Fabric Weave on the Architecture Coated Fabric Properties

Analysis and design of fabric membrane structures: A systematic review on material and structural performance

Comparative studies on the effect of fabric structure on mechanical properties of carbon fiber/epoxy composites

Mechanical Properties and Elastic Moduli of PVDF/PES Coated Fabrics Under Cyclic Tension

Detailed Deformation Behaviors and Tensile Parameters for Coated Warp-Knitted Fabrics in 2D Stress Space

Shear Behavior of Architectural Coated Fabrics under Biaxial Bias-Extension

Uniaxial Tensile Behavior of Anchored Carbon Fabric-Reinforced Cementitious Matrix Plates

Study on Mechanical Properties of High Performance Envelope Materials

Laboratory Test and Mechanism Analysis on the Reinforced Role of Civil Synthetic Material

Biaxial tensile behavior and strength of architectural fabric membranes

Effect of the viscosity of polyvinyl chloride resin and weaving structures of polyester fabric on the off-axis mechanical properties of PVC coated fabric

A New Biaxial Tensile Shear Test Method to Measure Shear Behaviour of Coated Fabrics for Architectural Use

Effects of On-Axis and Off-Axis Tension on Uniaxial Mechanical Properties of Plain Woven Fabrics for Inflated Structures

Study on Static/dynamic Mechanical Properties and Constitutive Relation of Multilayered Composite-Function Cloth