Abstract:Fiber concrete exhibits superior performance in various aspects compared to plain concrete and has been widely researched and applied worldwide. However, many industrially made fibers are expensive, and their cost has to be considered before use; thus, it would be economically valuable to find inexpensive fibers with excellent properties to make fiber concrete. Rural areas have many rich straw resources to be disposed of; at the same time, the rapid development of the automobile industry has introduced a large number of used tires containing steel wire with a very low reuse rate. These two low-cost materials can be processed to make fibers, making the study of mechanical properties regarding their incorporation into concrete practically significant for reducing the cost of fiber concrete. Based on this, a three-factor, three-level orthogonal test was conducted to investigate the effects of different dosages of corn straw fibers and scrap steel fibers, as well as the water-cement ratio, on the mechanical properties of concrete. The optimum level of each factor for blended straw-waste-steel-fiber concrete with different mechanical properties was obtained using the polar and ANOVA methods. It was found that the compressive strength, splitting tensile strength, flexural strength, and impact resistance of the specimens after fiber dosing were better than those of plain concrete specimens with the same water-cement ratio. The maximum improvement was 14.96% in cubic compressive strength, 42.90% in tensile strength, and 16.30% in flexural strength, while the maximum improvement in impact energy consumption at the final crack was 228.03%. Combined with SEM microanalysis, the two fibers formed a stronger whole with the C-S-H gel. When the specimen was subjected to load, the two fibers were able to withstand part of the load, thus enhancing the load-bearing capacity. Finally, the optimal mix ratio of blended straw-scrap-steel-fiber concrete was determined to be 0.8% corn straw fibers by volume, 0.6% scrap steel fibers by volume, and a 0.45 water-cement ratio by combining the weights of the levels of each factor under its four different mechanical properties through hierarchical analysis. This analysis of mechanical properties provides a reference for practical applications in future projects.

Laboratory Test and Mechanism Analysis on the Reinforced Role of Civil Synthetic Material

Test Research on the Influencing Factors of the Mechanical Property of the Polypropylene Fiber Recycled Concrete

Intensified Test Research on the Influence of Polypropylene Fiber & Silica Fume on Recycled Concrete

Experimental Study on Dynamic Behavior of GFRP-to-concrete Interface

Experimental Study on Shear Strength Considering Initial Void Ratio and Plasticity Index

Analysis of the Load Stress of BFRP Continuously Reinforced Composite Pavement

Mechanisms of Reinforced Pavements on Soft Clay under Traffic Loading

Experimental and Theoretical Study on Interfacial Bond Performance Between Cfrp and Concrete under Static and Moving Load

Laboratory Study On Static Strength And Resilient Modulus Of Grading Macadam

Mechanical Properties and Microanalytical Study of Concrete Reinforced with Blended Corn Straw and Scrap Steel Fibers

Mechanical damage mechanism investigation on CFRP strengthened recycled red brick concrete

A Study on Thin Concrete Plate Reinforced with Textile

Interfacial Micro-Mechanical Behavior of Discrete Fiber-Reinforced Soil

Analysis of New Materials Application in Municipal Road Construction

MICROSTRUCTURAL STUDY ON INTERFACIAL INTERACTIONS BETWEEN FIBER REINFORCEMENT AND SOIL

STRAIN-HARDENING MECHANISMS AND METHODS FOR DETERMINING STRENGTH PARAMETERS OF MUNICIPAL SOLID WASTE

ANALYSIS AND EXPERIMENTAL STUDY OF STATICALLY LOADED GFRP HOLLOW SLAB

Evaluation of road performance and micro-mechanism analysis of bentonite plastic concrete subgrade

Study of Mechanical Properties of an Eco-Friendly Concrete Containing Recycled Carbon Fiber Reinforced Polymer and Recycled Aggregate

Composite Fiber Wrapping Techniques for Enhanced Concrete Mechanics

STUDY ON THE MECHANICAL PROPERTIES OF CARBON FIBER REINFORCED CASTING NYLON