Abstract:Abstract Recycled concrete technology can promote the sustainable development of the construction industry, but the insufficient mechanical properties of recycled concrete have become a key constraint on its development. By adding waste fibers, the mechanical properties of recycled concrete can be improved, and the problem of disposing of waste polypropylene fibers can be solved. In this article, the effects of recycled brick aggregate content and waste fiber content on the mechanical properties and microstructures of recycled brick aggregate concrete through macroscopic mechanical experiments and microstructure experiments are investigated. The results show that the addition of recycled brick aggregate reduces the mechanical properties of concrete; when the content of recycled brick aggregate is 100%, the compressive strength and splitting tensile strength decrease by 22.04 and 20.00%, respectively. The addition of waste fibers can improve the mechanical properties of recycled brick aggregate concrete, but it is necessary to control the contents of waste fibers in a certain range. When the content of waste fibers is 0.08%, the best improvement effect on the mechanical properties of concrete is achieved; the compressive strength of concrete with a 50% (100%) recycled aggregate replacement rate increases by 6.06% (8.90%), while the splitting tensile strength of concrete with a 50% (100%) recycled aggregate replacement rate increases by 2.30% (6.16%). Through microstructural analysis, the mechanism by which waste fiber improves the mechanical properties of recycled brick aggregate concrete is revealed. The addition of waste fibers has the effect of strengthening the framework inside the recycled brick aggregate concrete, forming a good structural stress system and allowing the recycled brick aggregate concrete to continue to bear loads after cracking. In this study, waste brick aggregate and waste fiber are effectively utilized, which can not only reduce pollution to the environment but also realize the sustainable utilization of resources.

Test Research on the Influencing Factors of the Mechanical Property of the Polypropylene Fiber Recycled Concrete

Intensified Test Research on the Influence of Polypropylene Fiber & Silica Fume on Recycled Concrete

Study on the Effect of Fly Ash and Polycarboxylic Acid Water Reducer on the Properties of Recycled Concrete

Concrete Incorporating Recycled Plastic Aggregates: Physical and Mechanical Properties and Predictive Models

Experimental Study on Mechanical Performance and Microstructure of Polypropylene Fiber Recycled Concrete

Mechanical properties of short polypropylene fiber enhanced recycled concrete under cyclic compression

Study on the mechanical properties and microstructure of recycled brick aggregate concrete with waste fiber

Experimental Study on Mechanical and Durability Properties of Glass and Polypropylene Fiber Reinforced Concrete

Research on the Stressed Performance of Polypropylene Fibrous Concrete Ditch

Mechanical Properties of Fully Recycled Aggregate Concrete Reinforced with Steel Fiber and Polypropylene Fiber

Mechanical Properties of Polypropylene Fiber Recycled Brick Aggregate Concrete and Its Influencing Factors by Gray Correlation Analysis

Research about the Effect of Polypropylene Fiber on Mechanical Properties of Curing Sludge

Synergistic Improvement of Strength Characteristics in Recycled Aggregates Using Nano-Clay and Polypropylene Fiber

Review of Mechanical and Temperature Properties of Fiber Reinforced Recycled Aggregate Concrete

Effect of Nano-TiO2 and Polypropylene Fiber on Mechanical Properties and Durability of Recycled Aggregate Concrete

Experimental Study of Mechanical Properties and Theoretical Models for Recycled Fine and Coarse Aggregate Concrete with Steel Fibers

A Study of Energy Dissipation of Polypropylene Fiber Reinforced Recycled Concrete Under Uniaxial Compression

Influence of Fine Recycled Aggregate on Physical and Mechanical Properties of Concrete

EXPERIMENT ANALYSIS ON BASIC MECHANIC PROPERTY OF RECYCLED CONCRETE

INFLUENCE OF SINGLE FIBER ON MECHANICAL PROPERTIES OF PAVEMENT CONCRETE

Mechanical Properties and Durability of Polypropylene and Steel Fiber-Reinforced Recycled Aggregates Concrete (FRRAC): A Review