Abstract:Abstract Recycled concrete technology can promote the sustainable development of the construction industry, but the insufficient mechanical properties of recycled concrete have become a key constraint on its development. By adding waste fibers, the mechanical properties of recycled concrete can be improved, and the problem of disposing of waste polypropylene fibers can be solved. In this article, the effects of recycled brick aggregate content and waste fiber content on the mechanical properties and microstructures of recycled brick aggregate concrete through macroscopic mechanical experiments and microstructure experiments are investigated. The results show that the addition of recycled brick aggregate reduces the mechanical properties of concrete; when the content of recycled brick aggregate is 100%, the compressive strength and splitting tensile strength decrease by 22.04 and 20.00%, respectively. The addition of waste fibers can improve the mechanical properties of recycled brick aggregate concrete, but it is necessary to control the contents of waste fibers in a certain range. When the content of waste fibers is 0.08%, the best improvement effect on the mechanical properties of concrete is achieved; the compressive strength of concrete with a 50% (100%) recycled aggregate replacement rate increases by 6.06% (8.90%), while the splitting tensile strength of concrete with a 50% (100%) recycled aggregate replacement rate increases by 2.30% (6.16%). Through microstructural analysis, the mechanism by which waste fiber improves the mechanical properties of recycled brick aggregate concrete is revealed. The addition of waste fibers has the effect of strengthening the framework inside the recycled brick aggregate concrete, forming a good structural stress system and allowing the recycled brick aggregate concrete to continue to bear loads after cracking. In this study, waste brick aggregate and waste fiber are effectively utilized, which can not only reduce pollution to the environment but also realize the sustainable utilization of resources.

What problem does this paper attempt to address?

The problem this paper attempts to address is: improving the mechanical properties of recycled brick aggregate concrete by adding waste fibers, thereby addressing the insufficient mechanical properties of recycled concrete, effectively utilizing waste polypropylene fibers, reducing environmental pollution, and achieving sustainable resource utilization. Specifically, the paper investigates the effects of recycled brick aggregate content and waste fiber content on the mechanical properties and microstructure of recycled brick aggregate concrete. The study shows that adding recycled brick aggregate reduces the mechanical properties of the concrete, while an appropriate amount of waste fiber can significantly improve its mechanical properties. When the waste fiber content is 0.08%, the compressive strength and splitting tensile strength of the concrete achieve the best improvement effect. Additionally, through microstructure analysis, the mechanism by which waste fibers improve the mechanical properties of recycled brick aggregate concrete is revealed, namely that waste fibers can enhance the internal skeleton structure of the concrete, forming a good stress system, allowing the concrete to continue bearing loads even after cracking.

Study on the mechanical properties and microstructure of recycled brick aggregate concrete with waste fiber

Test Research on the Influencing Factors of the Mechanical Property of the Polypropylene Fiber Recycled Concrete

Behavior of FRP-Confined Recycled Brick Aggregate Concrete under Monotonic Compression

Intensified Test Research on the Influence of Polypropylene Fiber & Silica Fume on Recycled Concrete

Optimal Utilization of Low-Quality Construction Waste and Industrial Byproducts in Sustainable Recycled Concrete

Study on Mechanical Properties and Microscopic Mechanism of PVA-Modified Recycled Brick Aggregate Concrete

Research Progress on Fiber-Reinforced Recycled Brick Aggregate Concrete: A Review

Study on Pavement Performance of Cement Stabilized Recycled Brick Aggregate Base with Basalt Fiber

Mechanical Properties of Fully Recycled Aggregate Concrete Reinforced with Steel Fiber and Polypropylene Fiber

Pervious Concrete with Secondarily Recycled Low-Quality Brick-Concrete Demolition Residue: Engineering Performances, Multi-Scale/phase Structure and Sustainability

Experimental Study of Mechanical Properties and Theoretical Models for Recycled Fine and Coarse Aggregate Concrete with Steel Fibers

Mechanical Properties of Polypropylene Fiber Recycled Brick Aggregate Concrete and Its Influencing Factors by Gray Correlation Analysis

Total Recycling of Low-Quality Urban-Fringe Construction and Demolition Waste Towards the Development of Sustainable Cement-Free Pervious Concrete: the Proof of Concept

Road Performance Investigation on Fiber-Reinforced Recycled Cement Base Material

Experimental Study on Mechanical Performance and Microstructure of Polypropylene Fiber Recycled Concrete

Study on the Effect of Fly Ash and Polycarboxylic Acid Water Reducer on the Properties of Recycled Concrete

Review of Mechanical and Temperature Properties of Fiber Reinforced Recycled Aggregate Concrete

The Impact Resistance and Mechanical Properties of Recycled Aggregate Concrete with Hooked-End and Crimped Steel Fiber

Modification of Recycled Concrete Aggregate and Its Use in Concrete: An Overview of Research Progress

Effect of Glass Fiber-Reinforced Plastic Waste on the Mechanical Properties of Concrete and Evaluation of Its Feasibility for Reuse in Concrete Applications

Study of Mechanical Properties of an Eco-Friendly Concrete Containing Recycled Carbon Fiber Reinforced Polymer and Recycled Aggregate