Abstract:Demolished concrete, as one main form of construction and demolition wastes, has been widely studied of being utilized as recycled aggregates (RAs) in new concrete production. However, existing studies of applying RAs have been limited to the mechanical and durability issues of cementitious composites containing RAs. There has not been sufficient research of adopting RAs in cementitious products to also address the environmental sustainability. On the other hand, existing research utilizing cementitious products (e.g., concrete pavement) for air purification purpose have not adequately considered RA usage. Aiming to address the two sustainable objectives (i.e., waste diversion and air purification) simultaneously in concrete mix, this research adopted a two-step approach. Firstly, we studied and identified the optimal mix design of pervious concrete containing TiO2-soaked recycled coarse aggregates (RCAs) in order to achieve the higher compressive strength; secondly, we investigated the photocatalytic performance of pervious concrete containing RCAs coated with TiO2 photocatalysts. The photocatalytic performance of pervious concrete was also tested by applying a 10-min heavy rainwater wash. Experimental test results revealed that the internal voids of adhered mortar enabled RCAs to absorb more TiO2 particles. The NO degradation rate of TiO2-soaked RCAs increased from 71.4% to 80.6% when RCAs' size decreased from 15-20 mm to 5-10 mm. The orthogonal experimental investigation indicated that water-to-binder ratio had the most significant effect on concrete compressive strength, followed by ratio of RCAs to binder, and replacement ratio of RCAs to natural aggregates. The optimized mix design for pervious concrete containing RCAs was identified to achieve highest strength (i.e., water-to-binder ratio at 0.35, coarse aggregate-to-binder ratio of 3 by mass, fly ash replacement rate to Portland cement at 5%, and 50% replacement ratio of RCAs to NCAs). The concentration of TiO2 solution at 0.3% was identified as the optimal ratio to achieve the highest NO degradation rate at 70% before rainwater wash. The NO degradation rates of pervious concrete still reached nearly 50% after 10-min heavy rainwater wash, indicating that pervious concrete using RCAs coated with TiO2 could largely maintain its photocatalytic capacity. This study addresses two main social and environmental issues in developing countries (e.g., China), namely overwhelming amount of construction & demolition wastes being generated, and air pollution. It leads to the cleaner production in concrete pavement construction by achieving the optimization between waste reuse, air purification, and engineering properties of porous concrete. (c) 2019 Elsevier Ltd. All rights reserved.

Total Recycling of Low-Quality Urban-Fringe Construction and Demolition Waste Towards the Development of Sustainable Cement-Free Pervious Concrete: the Proof of Concept

Pervious Concrete with Secondarily Recycled Low-Quality Brick-Concrete Demolition Residue: Engineering Performances, Multi-Scale/phase Structure and Sustainability

Optimal Utilization of Low-Quality Construction Waste and Industrial Byproducts in Sustainable Recycled Concrete

Recycling Stone Powder As a Partial Substitute for Cementitious Materials into Eco-Friendly Manufactured Sand Ultra-High Performance Concretes: Towards Cleaner and More Cost-Effective Construction Production

Development of Sustainable Self-Compacting Concrete Using Recycled Concrete Aggregate and Fly Ash, Slag, Silica Fume

Novel recycling application of high volume municipal solid waste incineration bottom ash (MSWIBA) into sustainable concrete

Effects of Solid Waste Reutilization on Performance of Pervious Concrete: A Review

Recycling and optimum utilization of engineering sediment waste into low-carbon geopolymer paste for sustainable infrastructure

Research progress on recycled clay brick waste as an alternative to cement for sustainable construction materials

Compressive Strength, Permeability, and Abrasion Resistance of Pervious Concrete Incorporating Recycled Aggregate

Carbon Sequestration by Preparing Recycled Cement, Recycled Aggregates, and Recycled Concrete from Construction and Demolition (C&D) Wastes

A Sustainable Reuse of Agro-Industrial Wastes into Green Cement Bricks

Experimental Research on the Performance of Recycled Waste Concrete Powder (RWCP) on Concrete

Studying the Mix Design and Investigating the Photocatalytic Performance of Pervious Concrete Containing TiO2-Soaked Recycled Aggregates

Physical Performance, Durability, and Carbon Emissions of Recycled Cement Concrete and Fully Recycled Concrete

Estimation of Resilient Modulus of Cement-Treated Construction and Demolition Waste with Performance-Related Properties

Study on Alkali-Activated Prefabricated Building Recycled Concrete Powder for Foamed Lightweight Soils

Experimental Research on Application of Waste Concrete Powder–Waste Brick Powder–Cement Grout for Foundation Reinforcement in Mining Goaf

Recycled Construction and Demolition Waste as Supplementary Cementing Materials in Eco-Friendly Concrete

Reusing Construction and Demolition Waste to Prepare Alkali-Activated Cement

Experimental Study on the Mechanical Properties and Permeability of Cement-Stabilized Permeable Recycle Aggregate Materials