Abstract:<p>The mechanical behaviors and damage evolutions of carbon/epoxy woven fabric composites with three different geometries, i.e., one plain weave and two twill weave patterns with different areal densities, are studied under tensile loading. The effects of weave patterns on mechanical properties are investigated by monotonic and cyclic tension tests. Remarkable variations in stress–strain curve, Poisson's ratio, residual strain and strain map exist in the three composites. Crimp ratio is found to be a critical factor to govern the mechanical properties. With smaller crimp ratio, a quasi-linear stress–strain curve with higher elastic modulus and strength is observed. The stress–strain curves of composites with higher crimp ratio contain transition stages with significant tangent modulus degradation. Elastic modulus, strength and damage initiation are all correlated with the crimp ratio linearly regardless of the fabric pattern. Dramatic nonlinear evolution in Poisson's ratio occurs in the composite with higher crimp ratio. Cyclic tension results indicate that the residual strain is a more appropriate damage indicator than the unloading elastic modulus. Microstructure examination shows that damage developments are essentially related to the fabric geometry, and result in various mechanical behaviors. This study provides important insights into the geometry-deformation mechanism-mechanical property relationship of the woven composites.</p>

Experimental investigation on the fatigue life and damage mechanism of plain weave composites under biaxial tension–torsion combined fatigue loading

Damage Evolution of 3D Woven Carbon/epoxy Composites under the Tension–compression Fatigue Loading Based on Multi Damage Information

Tension-compression Fatigue Behavior of 3D Woven Composites

Damage Evolution of 3D Woven Carbon/epoxy Composites under Tension-Tension Fatigue Loading Based on Synchrotron Radiation Computed Tomography (SRCT)

Micro-XCT Characterization and Numerical Analysis of Bending Damage Mechanism in Carbon Fiber Plain, Twill and Winding Composite Tubes

Experimental study on compressive fatigue behavior and failure mechanism of 3D five-directional braided composites

Experimental Study on the Tension Fatigue Behavior and Failure Mechanism of 3D Multi-Axial Warp Knitted Composites

A Combined Experimental and Numerical Approach to Investigate the Failure Behaviors of 3D Woven Composites under Biaxial Tensile Loading

Effects of Tensile Fatigue Loads on Flexural Behavior of 3D Braided C/C Composites

Tensile and Compressive Failure Behaviors of Triaxially Braided Composite

Modeling the transverse tensile and compressive failure behavior of triaxially braided composites

Experimental Research on the Multiaxial Fatigue Behavior of Fibre Reinforced Composites

Experimental investigation on shear damage evolution of 3D woven composites using in situ computed tomography and multi-scale digital image correlation

Failure Analysis of 3D Woven Composites under Tension Based on Realistic Model

Progressive damage modelling and experimental investigation of three-dimensional orthogonal woven composites with tilted binder

Meso-Scale Progressive Damage Behavior Characterization of Triaxial Braided Composites under Quasi-Static Tensile Load

Experimental investigation on the effects of fabric architectures on mechanical and damage behaviors of carbon/epoxy woven composites

Study of In-Plane Fatigue Failure and Life Prediction of Weave Composites under Constant and Variable Amplitude Loading

Progressive Failure Simulation of Notched Tensile Specimen for Triaxially-Braided Composites.

Investigation on fatigue behavior and failure mechanism of quasi-3D woven composites under combined high and low cycle fatigue

Multiaxial failure mechanism of 3D triple-twill warp-lining woven composites