Abstract:Force analysis of weaving yarns. Stress‐ strain curves and fractures sections of composites with different fabric structures under tensile load. Stress‐ strain curves and fracture mechanism of composites subjected to bending loads. The component yarns and fabrics effected the formability and stability of preforms, and finally determined the performance of corresponding composites. In this research, four typical fabric structures of carbon fiber resin composites (CFRC) were introduced to conduct the comparative investigation. The stability of component yarns in natural state and in fabrics have been discussed at mesoscopic scale, and the main methods to improve the structural stability of preforms were proposed. Composites with and without stable‐structural fibers and fabrics were manufactured by the modified curing process, and the yarn cross‐sections in specimens were analyzed. The tensile and bending performance of these composite specimens was comparatively conducted to discuss the influence of stable preforms on the elastic properties. The fracture mode and mechanism of specimens were illustrated in meso‐scale. The results depicted that yarns and fabrics with stable‐structural cross‐section could ensure a high fiber volume fraction, reducing the curvature of load‐bearing yarns, and effectively reduce the yarn curvature along bearing direction. The high interfacial bonding strength of composites with stable geometrical fabrics exhibited the excellent in‐plane mechanical properties, and presented the obvious brittle fracture characteristics when the fibers fully exert their load‐bearing capacity. Highlights Stable‐structural fibers result in the prominent performance of composites. Performance of composites with stable preforms show the low dispersion. Stable cross‐section of component yarns can enhance the stability of preforms. Low curvature yarns lead to brittle fracture characteristics of composites.

Effect of triaxial woven fabric on bending properties of unidirectional composites

Influence of Fiber Cutting at the Composite Grid Intersection on the Compressive Performance of Laminate

Failure behavior and damage visualization of thick carbon/aramid hybrid woven composites under flexural loading conditions

Micro-XCT Characterization and Numerical Analysis of Bending Damage Mechanism in Carbon Fiber Plain, Twill and Winding Composite Tubes

Experimental and Numerical Study on Failure Behaviors of Composite Grid Stiffeners under Tensile and Flexural Loading

Multiaxial failure mechanism of 3D triple-twill warp-lining woven composites

Flexural progressive damage and failure behavior of carbon-aramid/epoxy hybrid woven composites

Effects of fabric architectures on mechanical and damage behaviors in carbon/epoxy woven composites under multiaxial stress states

Experimental investigation on the effects of fabric architectures on mechanical and damage behaviors of carbon/epoxy woven composites

The Effect of Single and Double-wefted Styles on the In-plane Impact Behavior of Fabric Carbon-aramid/Epoxy Intralayer Hybrid Composite Laminates

Effect of stable-structural 3D woven preform on tensile and flexural properties of carbon fiber/epoxy composites

Study on biaxial tensile failure behavior of ultra-thin-ply carbon fiber reinforced composites

Anisotropic failure analysis of 2.5-D braided composites under compression

Comparative studies on the effect of fabric structure on mechanical properties of carbon fiber/epoxy composites

The Effect of Structural and Process Parameters on the Effective Properties of Polymer Composites Reinforced by Fiber-rod and Three-dimensional Weaving

The effect of interface properties on the mechanical behavior of 3D braided composites under unidirectional tensile loading

The effect of interface properties on the mechanical behaviour of 3D braided composites under unidirectional tensile loading

Mechanical Characterization and Impact Damage Assessment of Hybrid Three-Dimensional Five-Directional Composites

Fracture toughness and fiber bridging mechanism for mode-I interlaminar failure of spread-tow woven composites

Role of stable‐structural yarns and fabrics on the tensile and bending performance of carbon fiber resin composites

Analysis of in-plane compression failure mechanism in carbon fiber braided composite with different off-axial angles