Abstract:An integrated curing simulation methodology considering resin flow and compaction. Computational methods provide effective tools for the prediction of the curing behavior of composites, especially for large‐scale complex composite structures. The flow‐compaction analysis during curing receives insufficient attention in current studies. In this work, an integrated framework considering the heat transfer, the cross‐linking reaction, the flow and compaction, and the stress–strain module is established. A comprehensive resin flow termination criterion is proposed. L‐shaped composites with a stacking layer of [45/90/−45/0]s were fabricated, and the good agreement between the experimentally measured and the numerically predicted contour data validated the current model. Compared with Hubert's model, the prediction accuracy of the thickness and fiber volume content increases by 4.24% and 3.92%, respectively. Correlation analysis between the fiber volume ratio predicted by numerical methods and experimental results (94% for this method, −41% for Hubert's model) demonstrates the well‐capture of nonuniform fiber distribution in curved composites for the current strategy. The overall framework provides an accurate and promising tool for the prediction of the curing behavior of complex composite components. Highlights An integrated numerical methodology is proposed considering the resin flow and compaction. The viscosity‐temperature coupled feature of resin is considered in the permeability coefficients. A comprehensive resin flow termination criterion is proposed for an accurate prediction. The resin content, thickness, and spring‐in angle of L‐shaped laminates are characterized. The good correlation between the experimental and numerical results validates this method. Compared with the model proposed by Hubert, the prediction accuracy improves.

Numerical modeling for curing of unidirectional carbon fiber reinforced polymer based on micromechanics in Laplace domain

Thermo-Chemo-Mechanical Modeling of Residual Stress in Unidirectional Carbon Fiber-Reinforced Polymers during Manufacture

Characterization and Finite Element Modeling for Thermoset Resin of Carbon Fiber Prepregs During Curing

Numerical investigation of the effect of thermal gradients on curing performance of autoclaved laminates

Micro-scale process modeling and residual stress prediction in fiber-reinforced polymers using refined structural models

Mesoscopic Simulation on Curing Deformation and Residual Stresses of 3D Braided Composites

Numerical Simulation of Composite Material Light-Curing Process Based on the Finite Element Analysis Method

Microscale viscoplastic analysis of unidirectional CFRP composites under the influence of curing process

Numerical Simulation of Residual Strain/Stress for Composite Laminate During Overall Curing Process

Viscosity‐coupled curing simulation model for L‐shaped composites considering flow and compaction

Micromechanical modeling for longitudinal tensile property of unidirectional CFRP considering dispersion of fiber properties

Micromechanics-based Modeling of Temperature-Dependent Effective Moduli of Fiber Reinforced Polymer Composites with Interfacial Debonding

Computational modeling of micro curing residual stress evolution and out-of-plane tensile damage behavior in fiber-reinforced composites

A cooperative relaxation model with two physical parameters for investigating the temperature and cure dependence of relaxation mechanisms in resins

Numerical Optimizing and Experimental Evaluation of Stepwise Rapid High-Pressure Microwave Curing Carbon Fiber/epoxy Composite Repair Patch

The Numerical Simulation Research of Internal Curing Process for Fiber Winding Composite Shell

A Numerical Model to Predict the Relaxation Phenomena in Thermoset Polymers and Their Effects on Residual Stress during Curing—Part I: A Theoretical Formulation and Numerical Evaluation of Relaxation Phenomena

A Micromechanical Debonding Analysis of Fiber-Reinforced Composites Due to Curing Residual Stress

The Effects of Curing Process on the Damage Behavior of Additively Manufactured Fiber-Reinforced Thermosetting Composites

Numerical and Experimental Studies on Cured Shape of Thin Unsymmetric Carbon/Epoxy Laminates

Three-Dimensional Thermo–Chemo–Mechanical Coupled Curing Analysis for the Filament Wound Composite Shell