Abstract:This work involved the precise prediction and in-depth analysis of cure-induced warping of T-shaped parts with inconsistent layup. First, the warping mechanism of this kind of part was studied. Then, a finite element analysis (FEA) that considered the parts' structural characteristics and inconsistent layup using the curing mechanical constitutive model was developed to predict the warping. Following verification of the model's accuracy, the effects of material and structural characteristics on warping were investigated. When designing T-shaped parts, selecting materials with lower thermal expansion coefficients can help minimize warping. Additionally, increasing the radius of the chamfer at the rib and flange connections is also effective. By taking into account the effects of structural parameters and inconsistent layup by using both classical laminated plate theory and artificial neural networks (ANN), a rapid and accurate surrogate model for warping prediction was finally developed. It was discovered that the two-layer ANN model performed better than the other two models and could predict warping with accuracy and speed. For the parts analyzed in this work, this model is able to identify the fluctuations of warping captured by FEA. Moreover, by defining deviation as the difference between the predicted values of the surrogate model and the FEA, it can be observed that the majority of deviations for the validation set are within +/- 1.5 mm. This demonstrates that the two-layer ANN possesses strong generalization ability and high accuracy in predicting warping.Highlights The inconsistent layup could significantly affect the T-shaped part's warping. Cutting off a part's rib may significantly reduce its warping. A rapid and accurate model for warping prediction was developed. The layup and structure's influence could be identified by the two-layer ANN. Developing an efficient and accurate method for evaluating the cure-induced deformation of T-shaped composite parts. image

Cured Shape Prediction of the Bistable Hybrid Composite Laminate

A Novel Bistable Hybrid Composite Laminate and Multistable Wave-like Skin

Cured shape of cross-ply thin unsymmetric composite laminates

Cured Shapes of Bi-stable CFRP Composite Laminates with the Side Length Exceeding a Critical Value

Cured shape and snap-through of bistable twisting hybrid [0/90/metal]T laminates

Cured Deformation and Application of Unsymmetric Composite Thin Laminates

Design and Manufacturing of Highly Tailorable Pre-Bent Bi-Stable Composites

Analysis of bi-stability and residual stress relaxation in hybrid unsymmetric laminates

A Model on the Curved Shapes of Unsymmetric Laminates Including Tool-Part Interaction

Bi‐stable Cured Shape of CFRP Variant Structures with Asymmetric Layup: Rapid Prediction and Inverse Design

Bistable Characteristics of Unsymmetric Cross-ply Composite Laminates Considering Different Boundary Shapes

Numerical and Experimental Studies on Cured Shape of Thin Unsymmetric Carbon/Epoxy Laminates

Cured Shapes And Snap-Through Loads Analysis Of Bi-Stable Polyimide Film Hybrid Composite Laminates

Modeling on the Effect of Automated Fiber Placement Induced Gaps in Curved Composite Laminates

Cured Shape Prediction of Fiber Metal Laminates Considering Interfacial Interaction

A Rapid and Precise Approach to Predicting the Cure‐induced Warping of T‐shaped Composite Parts with Inconsistent Layup

Theoretical Analysis of the Buckling Behaviors of Inhomogeneous Shape Memory Polymer Composite Laminates Considering Prestrains

Experimental study and numerical simulation of morphing characteristics of bistable laminates embedded with 3D printed Shape memory polymers

Analysis Of Strain Uniformities In Asymmetric Bi-Stable Composite Laminates

On Strength Prediction of Laminated Composites

Predicting delamination of hybrid laminate via stress modification on interlaminar matrix layer