Abstract:Asymmetric composite laminates can have a bi-stable response, due to during the elevated temperature of manufacturing process, and residual thermal stresses lead to a curved shape at room temperature. These laminates can have two stable configurations at room temperature: cylindrical configuration I with a major curvature in x axis and cylindrical configuration II with an opposite curvature in orthogonal y axis. The large deflections that can be achieved by snap-through from one configuration to another, along with a need for small and removable energy input, make them of interest for a wide range of engineering application, notably morphing application in the aerospace industry. After 30 years of research efforts the shapes and response of asymmetric laminates of general layup have been well characterized. In this work, the Extended Classed Lamination Theory is considered as a basic approach to analysis the strains distribution of the bi-stable laminates. The paper begins by outlining the existing modeling formulation for arbitrary layup laminates and deriving an analytical formulation to an orthogonal laminate geometry. It is found that the distributions of strains are uniform, and the magnitudes of strains are closely related to the configurations. The strain of x direction is much more than y direction in configuration A with a major curvature in x axis. The similar situation also exists in configuration B. The changes of strains during snap-though are discussed, and compared with the Finite Element Models and experiments. The strain gauge test is carried out in experiments. The results show that the distributions of Models and experiments. The strain gauge test is carried out in experiments. The results show that the distributions of strain changes are also even.

Cured shape and snap-through of bistable twisting hybrid [0/90/metal]T laminates

Cured Shape Prediction of the Bistable Hybrid Composite Laminate

Cured Shapes of Bi-stable CFRP Composite Laminates with the Side Length Exceeding a Critical Value

Cured shape of cross-ply thin unsymmetric composite laminates

A Novel Bistable Hybrid Composite Laminate and Multistable Wave-like Skin

Cured Shapes And Snap-Through Loads Analysis Of Bi-Stable Polyimide Film Hybrid Composite Laminates

Bistable Characteristics of Unsymmetric Cross-ply Composite Laminates Considering Different Boundary Shapes

A Model on the Curved Shapes of Unsymmetric Laminates Including Tool-Part Interaction

Design and Analysis of Multistable Curvilinear-fiber Laminates Based on Continuous Fiber 3D Printing of Thermosetting Resin Matrix

Cured Deformation and Application of Unsymmetric Composite Thin Laminates

Bi‐stable Cured Shape of CFRP Variant Structures with Asymmetric Layup: Rapid Prediction and Inverse Design

An Analysis for Snap-Through Behavior of Bi-Stable Hybrid Symmetric Laminate with Cantilever Boundary

Analysis of bi-stability and residual stress relaxation in hybrid unsymmetric laminates

Bistable characteristics of hybrid composite laminates embedded with bimetallic strips

Cured Shape Prediction of Fiber Metal Laminates Considering Interfacial Interaction

Numerical and Experimental Studies on Cured Shape of Thin Unsymmetric Carbon/Epoxy Laminates

Design and manufacture of mould-free fibre-reinforced laminates with compound curvature

Investigation of Curing Deformation Behavior of Curved Fiber Metal Laminates

Numerical and Analytical Investigation Into the Effects Of Stacking Sequences on the Distortion of Asymmetric Composite Laminates in the Curing Cycle

Analysis Of Strain Uniformities In Asymmetric Bi-Stable Composite Laminates

Twisting Control Strategy of Bistable Composite Shell with Initial Curvature