Abstract:An integrated curing simulation methodology considering resin flow and compaction. Computational methods provide effective tools for the prediction of the curing behavior of composites, especially for large‐scale complex composite structures. The flow‐compaction analysis during curing receives insufficient attention in current studies. In this work, an integrated framework considering the heat transfer, the cross‐linking reaction, the flow and compaction, and the stress–strain module is established. A comprehensive resin flow termination criterion is proposed. L‐shaped composites with a stacking layer of [45/90/−45/0]s were fabricated, and the good agreement between the experimentally measured and the numerically predicted contour data validated the current model. Compared with Hubert's model, the prediction accuracy of the thickness and fiber volume content increases by 4.24% and 3.92%, respectively. Correlation analysis between the fiber volume ratio predicted by numerical methods and experimental results (94% for this method, −41% for Hubert's model) demonstrates the well‐capture of nonuniform fiber distribution in curved composites for the current strategy. The overall framework provides an accurate and promising tool for the prediction of the curing behavior of complex composite components. Highlights An integrated numerical methodology is proposed considering the resin flow and compaction. The viscosity‐temperature coupled feature of resin is considered in the permeability coefficients. A comprehensive resin flow termination criterion is proposed for an accurate prediction. The resin content, thickness, and spring‐in angle of L‐shaped laminates are characterized. The good correlation between the experimental and numerical results validates this method. Compared with the model proposed by Hubert, the prediction accuracy improves.

Cured shape of cross-ply thin unsymmetric composite laminates

Numerical and Experimental Studies on Cured Shape of Thin Unsymmetric Carbon/Epoxy Laminates

Cured Deformation and Application of Unsymmetric Composite Thin Laminates

Cured Shape Prediction of the Bistable Hybrid Composite Laminate

Cured Shapes of Bi-stable CFRP Composite Laminates with the Side Length Exceeding a Critical Value

Modeling on the Effect of Automated Fiber Placement Induced Gaps in Curved Composite Laminates

Investigation on the Compressive Mechanical Properties of Ultra-Thick CFRP Laminates

Bistable Characteristics of Unsymmetric Cross-ply Composite Laminates Considering Different Boundary Shapes

Cured shape and snap-through of bistable twisting hybrid [0/90/metal]T laminates

Understanding the Impact of Fibre Wrinkle Architectures on Composite Laminates Through Tailored Gaps and Overlaps

A 3D modeling of the effect of layup orientation on the thickness uniformity of cured composite L-shaped laminates

Experimental and numerical investigation of stringer's 90° plies optimization of composite material stiffened panels

Damage-Caused Residual Curvatures in Symmetric Cross-Ply Laminates

Study on Cure-Induced Residual Stresses and Spring-in Deformation of L-shaped Composite Laminates Using a Simplified Constitutive Model Considering Stress Relaxation

Viscosity‐coupled curing simulation model for L‐shaped composites considering flow and compaction

A Novel Bistable Hybrid Composite Laminate and Multistable Wave-like Skin

Numerical investigation of the effect of thermal gradients on curing performance of autoclaved laminates

Design and manufacture of mould-free fibre-reinforced laminates with compound curvature

An Analytic Approach for the Temperature and Strain Fields of Composite Laminate Curing on A Solid Mold

Curing Deformation Analysis for the Composite T-shaped Integrated Structures

Analysis of curing deformation for resin matrix composite T-shaped stiffened panel