Abstract:A comprehensive analytical model for predicting the long-term durability of polymers and polymer matrix composites should in general take into account polymer viscoelastic/viscoplastic creep, hygrothermal effects, and the effects of physical and chemical ageing on material response. These effects, in turn are influenced by a multitude of factors such as polymer morphology, service temperature, ambient relative humidity, internal moisture concentrations, stacking sequence, fibre volume fraction, fibre architecture, applied stress level, degree of damage and ageing time. The primary objective of this paper is to present a multi-scale modelling methodology to simulate the long-term interlaminar properties in polymer matrix woven composites and then predict the critical regions where failure is most likely to occur. A micro-mechanics approach towards modelling the out-of-plane viscoelastic behaviour of a five-harness satin woven-fibre cross-ply composite laminate is presented, taking into consideration the weave architecture and time-dependent effects. In-plane properties are assumed to be dominated by the carbon fibres and are hence deemed elastic. The classical lamination theory model proposed by Raju and Wang is adapted to include the in-plane elastic behaviour of woven fibre composites. For the matrixdominated out-of-plane response, a viscoelastic creep model is employed to model the resin, based on Schapery's nonlinear viscoelastic constitutive law. In addition, physical ageing of the matrix has been included in the model, using the effective time theory proposed by Struik. Furthermore, the effect of large deflections and rotations on the time dependent out-of-plane behaviour is also investigated using the micro-mechanics model. The homogenized in-plane and out-of-plane compliance obtained using the proposed micro-mechanics methodology could be applied within the framework of a structural finite element code to model the macro-scale long-term behaviour of a woven fabric composite structure.

Study on Cure-Induced Residual Stresses and Spring-in Deformation of L-shaped Composite Laminates Using a Simplified Constitutive Model Considering Stress Relaxation

Multi-Scale Modelling of Long-Term Mechanical Behaviour in Polymer Composite Laminates with Woven Fibre Architecture

Viscosity‐coupled curing simulation model for L‐shaped composites considering flow and compaction

Modeling on the Effect of Automated Fiber Placement Induced Gaps in Curved Composite Laminates

Thermo-Chemo-Mechanical Modeling of Residual Stress in Unidirectional Carbon Fiber-Reinforced Polymers during Manufacture

Numerical Simulation of Residual Strain/Stress for Composite Laminate During Overall Curing Process

Numerical simulation and experiment validation of variable stiffness composite laminates with open holes under unidirectional tension

Study Of Flexural Response In Strain Hardening Cementitious Composites Based On Proposed Parametric Model

Computational modelling of postbuckling behavior of composite T-stiffened panels with different bonding methods

Microscale viscoplastic analysis of unidirectional CFRP composites under the influence of curing process

Theoretical and Experimental Studies on Residual Stresses of Advanced Polymer Composites

An alternative method to reduce process-induced deformation of CFRP by introducing prestresses

Numerical modeling for curing of unidirectional carbon fiber reinforced polymer based on micromechanics in Laplace domain

Computational modeling of micro curing residual stress evolution and out-of-plane tensile damage behavior in fiber-reinforced composites

A 3D modeling of the effect of layup orientation on the thickness uniformity of cured composite L-shaped laminates

Simulation Method for Curing Deformation of Composite Part Considering Tool–Part Interaction

Improved Distortion Prediction in Additive Manufacturing Using an Experimental-Based Stress Relaxation Model

A cooperative relaxation model with two physical parameters for investigating the temperature and cure dependence of relaxation mechanisms in resins

An Engineering Prediction Model for Stress Relaxation of Polymer Composites at Multiple Temperatures

Cured Deformation and Application of Unsymmetric Composite Thin Laminates

Modeling viscoelasticity-viscoplasticity of high-strain composites for space deployable structures