Abstract:Delamination generally occurs due to an edge effect. As the laminate is essentially bonded together form the individual laminate by the matrix, any delamination of the laminate must be initiated from a matrix failure and thus controlled by the stresses of the matrix. Based on this viewpoint, this paper predicts the initiation of laminate delamination through analyzing the stresses of the matrix. The stress field of a symmetrically laminated plate under an axial load is calculated by a three-dimensional finite element approach. To deal with the weak singularity occurred in the interlaminar stresses at the free edge, an average for the stresses of each lamina with respect to its thickness is carried out, and the internal stresses in the fiber and matrix of the lamina are determined in terms of the Bridging micromechanics Model. The thus obtained homogenized internal stresses must be converted into “true” values before a failure assessment can be made with respect to the original strength data of the fiber and matrix. Whereas the true stresses of the fiber are the same as its homogenized ones, those of the matrix are obtained by multiplying its homogenized quantities by respective stress concentration factors (SCFs) of the matrix in the composite. Such an SCF cannot be defined following a classical approach. All of the SCFs with perfect interface bonding and the transverse tensile SCF with a debonded interface have been calculated. Finally, an in-plane failure and a delamination initiation are considered separately for the laminate. The most important feature of this work is in that only the original elastic and strength data of the fiber and matrix are required in the prediction of a delamination initiation. Our predictions correlate reasonably with the available experimental data.

Predicting delamination of hybrid laminate via stress modification on interlaminar matrix layer

Prediction of Laminate Delamination from Strength Failure of Interlaminar Matrix-Layer

Assessing delamination initiation from fiber and matrix properties

A New Method to Predict Fatigue Life of Composite Laminate with Delaminating Effect Considered

Prediction of laminate delamination with no iteration

Application of a delamination model to laminated composite structures

Assessing delamination initiation of laminates based on bridging model

INTERLAMINAR STRESS ANALYSIS OF COMPOSITE LAMINATES SUBJECTED TO IN-PLANE LOADING

Assessing Delamination Initiation of Angle-Ply Laminates from Fiber and Matrix Properties

Delamination Propagation Manipulation of Composite Laminates under Low-Velocity Impact and Residual Compressive Strength Evaluation

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Failures of laminates under nonpenetrative impacts

An Extended Layerwise Method For Composite Laminated Beams With Multiple Delaminations And Matrix Cracks

On Strength Prediction of Laminated Composites

Failure Probability Prediction of Delamination under Cyclic Loading in Composite Laminates Using Cohesive Interface Elements

Delamination prediction in composite laminates under low-velocity impact

On the Distribution of Delamination in Composite Structures and Compressive Strength Prediction for Laminates with Embedded Delaminations

Local Buckling Prediction for Multiple-Delaminated Laminate Using the Critical Load of the Sub-Laminate Having the Maximum Flexural Stiffness

Development of a Standardized Test Procedure and an Improved Data Reduction Method for the Mixed-Mode I/II Delamination in Composite Laminates

Delamination Propagation and Compressive Strength Prediction of Laminated Composite

A numerical model on compressive behavior of cfrp laminate with a designed delamination