Abstract:This research work deals with aspects concerned with delamination detection in composite structures as revealed by an approach based on vibration measurements. Variations in vibration characteristics generated in composite laminates indicate the existence of delaminations because degradation due to delamination causes reduction in flexural stiffness and strength of the material and as a result vibration parameters like natural frequency responses are changed. Hence, it is possible to monitor the variation in natural frequencies to identify the presence of delamination, and assess its size and location for online structural health monitoring (SHM). The approach to this paper, therefore, typically depends on undertaking the analysis of structural models implemented by finite element analysis (FEA). The numerical solutions using FE models known as the simulator computes the natural frequencies for the delaminated and undelaminated specimens of composite laminates. However, these FE models are computationally expensive, and surrogate (approximation) models are introduced to curtail the computational expense. The simulator is employed to solve the inverse problem using algorithms based on computational intelligence concepts. An artificial neural network (ANN) model is developed to also solve the inverse problem for delamination detection directly and to provide surrogate models integrated with optimization algorithms (the gradient-based local search and non-dominated sorting genetic algorithm-II) to contain the computationally expensive simulations by FEA. This approach is termed as surrogate assisted optimization and it is seen that the engagement of surrogate models in lieu of the FE models in the optimization loop greatly enhances the accuracy of delamination detection results within an affordable computational cost and provides control over handling different variables. Meanwhile, to aid with the building of effective surrogate models using substantial number of training datasets, K-means clustering algorithm is harnessed and this effectively reduces the large training datasets usually required for ANN training. This paper demonstrated that ANN and optimization algorithms with surrogates show immense potentialities for use in delamination damage detection scenarios. Prediction errors of the algorithms were quantified and they were shown to be satisfactory when applied to previously experimental data. The algorithms in their inverse formulations are capable of predicting accurately delamination parameters. Hence, these algorithms should be employed for application in the domain of SHM where their small computational requirements could be exploited for online damage detection.

Predicting delamination in composite laminates through semi-analytical dynamic analysis and vibration-based quantitative assessment

Identifying Delamination in Carbon Fiber Composites Based on Defect Modes in Imperfect Phononic Crystals

An Algorithm Based on Logarithm of Wavenumber Amplitude for Detection of Delamination in Carbon Fiber Composite

Prediction Model of Residual Load-Bearing Capacity of Composite Laminates Using Deep Learning

Validation of algorithms for delamination detection in composite structures using experimental data

Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates under Different Loading Rates Using Acoustic Emission

A comparison of machine learning algorithms for assessment of delamination in fiber-reinforced polymer composite beams

A Deep Learning Method for Damage Prognostics of Fiber-Reinforced Composite Laminates Using Acoustic Emission

Delamination detection in composite plates using random forests

Data-Driven Approaches for Characterization of Delamination Damage in Composite Materials

A two-step method for delamination detection in composite laminates using experience-based learning algorithm

Delamination detection in composite laminates using improved surrogate-assisted optimization

Vibration-based inverse algorithms for detection of delamination in composites

Artificial neural network based delamination prediction in laminated composites

Predicting delamination of composite laminates using an imaging approach

Lamb wave-based quantitative identification of delamination in CF/EP composite structures using artificial neural algorithm

Delamination prediction in composite beams with built-in piezoelectric devices using modal analysis and neural network

Free Vibration-Based Delamination Detection in Fiber Metal Laminates Composite Beam

Delamination prediction in composite laminates under low-velocity impact

Vibration-Based In-Situ Detection and Quantification of Delamination in Composite Plates

Prediction of delamination growth in laminated composites using acoustic emission and Cohesive Zone Modeling techniques