Abstract:In order to get a better hygrothermal stress and failure prediction for CFRP laminate, an RVE model was established. Wet and thermal stress were coupled using a sequential method. Macroscopic and microscopic subroutines were developed to calculate the stress–strain field of CFRP laminate and RVE model. A multiscale numerical simulation of three‐point bending of moisture‐saturated CFRP laminate was conducted. A mesoscopic representative volume element (RVE) model of carbon fiber reinforced polymers (CFRP) laminate with 15 plies was established based on the principle of fiber random disturbance. The RVE model was validated by comparing the elastic parameters calculated by the RVE model, Chamis model, and Bridge model. Wet stress and thermal stress were coupled using a sequential method. Macroscopic and microscopic subroutines were developed to calculate the stress–strain field of CFRP laminate and RVE model. A multiscale numerical simulation of three‐point bending of moisture‐saturated CFRP laminate was conducted. Failure process and failure modes of CFRP laminate were discussed based on the multiscale simulation and SEM observations. The results show that the RVE model and the multiscale simulation strategy presented in this work can predict the coupled hygrothermal stress and the strength degradation due to moisture absorption very well. The maximum error between the simulated and experimental averaged force of the moisture‐saturated CFRP laminate subjected to three‐point bending is about 3.4%. Multiscale simulation demonstrated that uneven distribution of fibers can result in the fiber/matrix interfaces bearing a larger transverse stress in the fiber's dense distribution area. It is the main reason that results in fiber/matrix interface failure of CFRP laminates working in hygrothermal environments. Highlights A RVE model of CFRP laminate was presented using fibers random disturbance. Coupled hygrothermal stress of single fiber and surrounded matrix was obtained. A multiscale simulation of the strength change of the CFRP plate due to wet‐thermal stress was conducted. Failure modes of CFRP laminate are discussed based on the multiscale simulation.

Investigation of the Tensile Performance and Failure Mechanism of Carbon–aramid Hybrid Fibers/epoxy Sandwich Structure Laminates Using the UV-thermal Synergetic Curing Mechanism: Experimentation and Simulation

Numerical Optimizing and Experimental Evaluation of Stepwise Rapid High-Pressure Microwave Curing Carbon Fiber/epoxy Composite Repair Patch

Effective mechanisms responsible for increased strength and fracture strain of carbon fiber-reinforced plastic/steel hybrid laminates

A Combined Experimental and Computational Analysis of Failure Mechanisms in Open-Hole Cross-ply Laminates under Flexural Loading

Tensile and flexural mechanical attributes of hybrid carbon/basalt fiber metal laminates under various hybridization and stacking sequences

Flexural progressive damage and failure behavior of carbon-aramid/epoxy hybrid woven composites

The influence of the inter-ply hybridisation on the mechanical performance of composite laminates: Experimental and numerical analysis

Failure behavior and damage visualization of thick carbon/aramid hybrid woven composites under flexural loading conditions

Multiscale simulation of hygrothermal stress and mechanical properties degradation of carbon fiber reinforced polymers laminates

Experimental and theoretical investigation on tensile properties and fracture behavior of carbon fiber composite laminates with varied ply thickness

Transverse Bending and Axial Compressing Mechanical Characteristics of Carbon Fiber Reinforced Plastic Sandwich Laminated Square Tubes

Experimental and multiscale modeling investigations of cryo-thermal cycling effects on the mechanical behaviors of carbon fiber reinforced epoxy composites

Experimental and Numerical Investigation of the Mechanical Properties of 3D-Printed Hybrid and Non-Hybrid Composites

Effects of Curing Defects in Adhesive Layers on Carbon Fiber-Quartz Fiber Bonded Joint Performance

Mechanical Performance and Failure Analysis of a 3D-Printed "Continuous Layer–Lattice Layer–Continuous Layer" Sandwich Structure

Experimental Investigation on Tensile Properties of Carbon Fabric-Glass Fabric-Kevlar Fabric-Epoxy Hybrid Composite Laminates

Longitudinal tensile analysis of carbon fiber/epoxy composites under the coupling effect of high and low temperature cycle-humidity-bending load

Study on impact properties of carbon/kevlar fiber hybrid composites

Experimental research on hygrothermal properties of carbon fiber/epoxy resin composite under different hygrothermal conditions

Thermo-Chemo-Mechanical Modeling of Residual Stress in Unidirectional Carbon Fiber-Reinforced Polymers during Manufacture

Tensile impact behaviors and damage mechanism of woven carbon fiber-reinforced-polymer laminates considering adiabatic shear band