Abstract:By introducing tungsten oxide (WO3) doped N,N′-di(naphthalen-1-yl)-N,N′-diphenyl-benzidine (NPB) hole injection layer, the great improvement in device efficiency and the organic film morphology stability at high temperature were realized for organic light-emitting diodes (OLEDs). The detailed investigations on the improvement mechanism by optical, electric, and film morphology properties were presented. The experimental results clearly demonstrated that using WO3 doped NPB as the hole injection layer in OLEDs not only reduced the hole injection barrier and enhanced the transport property, leading to low operational voltage and high efficiency, but also improved organic film morphology stability, which should be related to the device stability. It could be seen that due to the utilization of WO3 doped NPB hole injection layer in NPB/tris (8-quinolinolato) aluminum (Alq3)-based device, the maximum efficiency reached 6.1 cd A−1 and 4.8 lm W−1, which were much higher than 4.5 cd A−1 and 1.1 lm W−1 of NPB/Alq3 device without hole injection layer. The device with WO3 doped NPB hole injection layer yet gave high efficiency of 6.1 cd A−1 (2.9 lm W−1) even though the device was fabricated at substrate temperature of 80 °C. These results adequately indicated that WO3 doped NPB was a promising hole injection layer for high efficiency and high stability OLEDs.

High Efficiency OLEDs with ZnO As a Hole-injecting Buffer Layer

Largely Enhanced Efficiency In Zno Nanowire/P-Polymer Hybridized Inorganic/Organic Ultraviolet Light-Emitting Diode By Piezo-Phototronic Effect

Al2O3 Buffer Layers and Characteristics of Organic Light Emitting Devices Made of Al-Doped ZnO Films

Performance Improvement of Organic Light Emitting Diode with Aluminum Oxide Buffer Layer for Anode Modification

Novel Solution-Processed ZnO-Based Electron Injection Layer for Organic Light-Emitting Diodes

Aqueous solution processed transition-metal-doped ZnO as electron injection layers for efficient inverted organic light emitting diodes

Obvious Efficiency Enhancement of Organic Light-Emitting Diodes by Parylene-N Buffer Layer

Effect of Nacl Buffer Layer on the Performance of Organic Light-Emitting Devices (Oleds)

Tungsten Oxide Doped N,N-'-Di(Naphthalen-1-Yl)-N,N-'-Diphenyl-Benzidine As Hole Injection Layer for High Performance Organic Light-Emitting Diodes

Enhanced Hole Injection and Improved Performance in Organic Light-Emitting Devices by Utilizing a Novel Composite Hole Injection Layer

Improved performances in top-emitting organic light-emitting diodes based on a semiconductor zinc oxide buffer layer

Performances enhancement in OLEDs by inserting ultrathin trilayer in electron injection structure and using MoO3 as hole buffer layer.

Significant Performance Enhancement of Inverted Organic Light-Emitting Diodes by Using ZnIx As a Hole-Blocking Layer

Highly-efficient Low-voltage OLED Built by Controlling Hole-transport Characteristics With Metal-oxide Dopants

Organic light-emitting devices with a 2-(4-biphenyl)-5-(4-butylphenyl)-1,3,4-oxadiazole layer between the α-naphtylphenyliphenyl diamine and 8-hydroxyquinoline aluminum

Investigation of Hole Injection Enhancement by MoO3 Buffer Layer in Organic Light Emitting Diodes

Electroluminescence Performance Of Organic Light-Emitting Diode With Molybdenum Trioxide Inside Hole Transport Layer

Highly Efficient Simplified Organic Light-Emitting Diodes Utilizing F4-TCNQ As an Anode Buffer Layer

High Efficiency WOLEDs with Low-Voltage and High Carriers Balance

Efficient Single-Active-Layer Organic Light-Emitting Diodes With Fluoropolymer Buffer Layers

Enhanced Brightness and Efficiency in Organic Light-Emitting Diodes Using SiO2 As Buffer Layer and Electron-Blocking Layer