Abstract:The current density-luminance-voltage characteristics of organic light-emitting devices (OLEDs) with N,N′-Bis(naphthalen-1-yl)-N,N′-bis(phenyl) benzidine (NPB) of various thicknesses as the hole transport layer have been investigated. It is found that for conventional structures of indium–tin–oxide/NPB/tris(8-hydroxyquinoline) aluminum (Alq3) (60 nm)/LiF (0.5 nm)/Al the optimal hole injection and luminescence efficiencies appear at NPB thicknesses of 5 and 20 nm, respectively. The large difference between the two optimal thicknesses suggests that the effective block of the NPB layer against electrons from across the Alq3/NPB interface is essential for high-efficiency operation of the OLEDs. The electron blocking effect of NPB is further confirmed by the electroluminescence (EL) behavior of devices with the structure of ITO/NPB(5 nm)/Alq3:4-(dicyanomethylene)-2-methyl-6-(p-dimethylaminostyryl)-4H-pyran (DCM) (30 nm)/NPB/Alq3(60 nm)/LiF(0.5 nm)/Al. The proportion of DCM EL to the whole EL decreases with increasing NPB thickness. This suggests that the NPB layer blocks electron transport to the Alq3:DCM layer. The Förster energy transfer from the 60 nm Alq3 layer to the DCM molecules is ruled out by the EL behavior observed after quenching excitons in the Alq3 layer. The origin of the difference in the optimal N,N′-Bis(3-methylphenyl)-N,N′-bis(phenyl)benzidine (TPD) thicknesses reported by other two different groups is also discussed.

Organic light-emitting devices with a 2-(4-biphenyl)-5-(4-butylphenyl)-1,3,4-oxadiazole layer between the α-naphtylphenyliphenyl diamine and 8-hydroxyquinoline aluminum

Efficient Single-Active-Layer Organic Light-Emitting Diodes With Fluoropolymer Buffer Layers

Obvious Efficiency Enhancement of Organic Light-Emitting Diodes by Parylene-N Buffer Layer

Efficient Organic Light-Emitting Diode Using Lithium Tetra(8-Hydroxy-Quinolinato) Boron As the Electron Injection Layer

Improved Performance of Organic Light-Emitting Diodes with MgF 2 As the Anode Buffer Layer

Organic light-emitting diodes with varying thickness of bathocuproine layer

P-113: Novel Structure Organic Light-Emitting Diodes with High Performance

Bright Single-Active Layer Small-Molecular Organic Light-Emitting Diodes with a Polytetrafluoroethylene Barrier

P-113: Society for Information Display: Novel Structure Organic Light-emitting Diodes With High Performance

Bipolar TADF Interlayer for High Performance Hybrid WOLEDs with an Ultrathin Non-Doped Emissive Layer Architecture

Studies on the Performances of Blue Organic Electroluminescent Device with Different Electron Transport Layers

Improved efficiency of organic light-emitting devices employing bathocuproine doped in the electron-transporting layer

Efficient organic light-emitting diodes with teflon as buffer layer

Small Molecular Phosphorescent Organic Light-Emitting Diodes Using A Spin-Coated Hole Blocking Layer

Narrow Emission from Polyimide Light-Emitting Diodes

Double-layer Printed White Organic Light-Emitting Diodes Based on Multicomponent High-Performance Illuminants

Improving the Performance of OLEDs by Using a Low-Temperature-evaporable N-Dopant and a High-Mobility Electron Transport Host.

Efficient light emitting diodes with Teflon buffer layer

Efficient Blue Organic Light-Emitting Diodes with Simple Structure Based on N, N '-Bis (1-Naphthyl)-n, N '-Biphenyl-1, 1 '-Biphenyl-4,4 '-Diamine

Electron Blocking and Hole Injection: the Role of N,N′-Bis(naphthalen-1-y)-N,N′-bis(phenyl)benzidine in Organic Light-Emitting Devices