Abstract:Organic light-emitting diodes (OLEDs) based on thermally activated delayed fluorescence-sensitized conventional fluorescence dyes (TSCF) offer the possibility of realizing an ultimate high efficiency and long-term stability devices through solution process. However, the currently reported TSCF-OLEDs easily suffer the harmful Dexter energy transfer (DET) process and aggregation induced quenching (ACQ) effect. Herein, we proposed a new strategy to suppress the DET and ACQ effect by introducing a polymer material into TSCF system, achieving high efficiency and stability of TSCF-OLEDs. The introducing polymer material into TSCF system can not only increase the intermolecular distance between TADF matrix and traditional dyes, further restraining the harmful DET process and ACQ effect, but also improve the solubility and film quality of all TSCF system. Based on this fact, the 2-(2,7-di(9H-carbazol-9-yl)-9,9-dimethylacridin-10(9H)-yl)dibenzo[b, d]thiophene 5,5-dioxide (2Cz-DMAC-BTB) sensitizing 2,8-Di-tert-butyl-5,11-bis(4-tert-butylphenyl)-6,12-diphenyltetracene (TBRb) solution-processed device Y2 with poly ethlene oxide (PEO) was firstly fabricated and exhibits a higher maximum EQE of 6.6 % and longer half time (LT50) of 64 hours comparing to that of Y1 without PEO. Subsequently, the TSCF-solution-processed device R2 with PEO shows a maximum EQEmax of 13.1 % and LT50 of 107 hours. These results adequately demonstrate the validity of our proposed strategy and provide a new route for developing more efficient all-fluorescent solution-processed TSCF-OLEDs.

Efficient organic light-emitting diodes with teflon as buffer layer

Efficient organic light-emitting diodes with Teflon as buffer layer

Efficient light emitting diodes with Teflon buffer layer

Red Doped Organic Light-Emitting Diodes with Teflon Buffer Layer

Efficient Single-Active-Layer Organic Light-Emitting Diodes With Fluoropolymer Buffer Layers

Highly Efficient Simplified Organic Light-Emitting Diodes Utilizing F4-TCNQ As an Anode Buffer Layer

Efficient Blue Organic Light-Emitting Diodes Employing Thermally Activated Delayed Fluorescence

Bright Single-Active Layer Small-Molecular Organic Light-Emitting Diodes with a Polytetrafluoroethylene Barrier

Bipolar TADF Interlayer for High Performance Hybrid WOLEDs with an Ultrathin Non-Doped Emissive Layer Architecture

Organic light-emitting devices with a 2-(4-biphenyl)-5-(4-butylphenyl)-1,3,4-oxadiazole layer between the α-naphtylphenyliphenyl diamine and 8-hydroxyquinoline aluminum

Obvious Efficiency Enhancement of Organic Light-Emitting Diodes by Parylene-N Buffer Layer

P-113: Novel Structure Organic Light-Emitting Diodes with High Performance

Enhancing the contrast and power efficiency of organic light-emitting diodes using CuPc/TiOPc as an anti-reflection layer

Effect of CsF Buffer Layer on Charge-Carrier Mobility in Organic Light-Emitting Diodes Based on a Polyfluorene Copolymers by Admittance Spectroscopy

P-113: Society for Information Display: Novel Structure Organic Light-emitting Diodes With High Performance

Improved Performance of Organic Light-Emitting Diodes with MgF 2 As the Anode Buffer Layer

Influence of PEDOT:PSS Buffer Layer on the Performance of Organic Photocoupler

Highly efficient green TADF organic light-emitting diodes by simultaneous manipulating hole and electron transport.

Blocking Energy-Loss Pathways for Efficient All-Fluorescent Solution-processed Organic Light-emitting Diodes by Introducing Polymer Additive

Lateral current suppression in tandem organic light-emitting diodes by adopting a buffer layer

Efficiency Improvement Of Yellow Organic Light-Emitting Devices By Using Mixed Hole Transporting Layer