Abstract:1 Email: qiuy@tsinghua.edu.cn Abstract It is generally recognized that hole-transport layers (HTLs) with thickness on the order of tens nanometer are indispensable to high luminance and quantum efficiency in small molecule organic light-emitting diodes (OLEDs). However, in this work, without conventional HTLs, a thin polytetrafluoroethylene (Teflon) layer was introduced as hole-injection layer, followed by deposition of an emissive layer (EML), Alq3 doped with 0.7wt% DMQA. And simultaneously, a blocking and electron transport layer of aluminum (III) bis (2-methyl-8-quinolinato) 4-phenylphenolate (BAlq) ETL was employed to confine holes and excitons in Alq3 layer. The obtained OLEDs exhibited a luminance of over 88000 cd/m2 and external quantum efficiency of 5.4% (21.1 cd/A) at voltage of 19.8 V and current density of 418 mA/cm2. When the Teflon thickness was 10.0 nm under our conditions, well-balanced charge injection could be obtained in OLEDs. It was also found that the high performance was related to triplet-triple annihilation, in which triplet excited tris (8-hydroxyquinoline) aluminum (Alq3) excitons go through annihilative reactions with other Alq3 excitons to form singlet excited molecules. It provides a new way of obtaining highly efficient and stable OLEDs with well-balanced charge injection.

Efficient Single-Active-Layer Organic Light-Emitting Diodes With Fluoropolymer Buffer Layers

High-Efficiency Dual-Dopant Polymer Light-Emitting Diodes with Ultrafast Inter-fluorophore Energy Transfer

Organic light-emitting devices with a 2-(4-biphenyl)-5-(4-butylphenyl)-1,3,4-oxadiazole layer between the α-naphtylphenyliphenyl diamine and 8-hydroxyquinoline aluminum

Obvious Efficiency Enhancement of Organic Light-Emitting Diodes by Parylene-N Buffer Layer

Bright Single-Active Layer Small-Molecular Organic Light-Emitting Diodes with a Polytetrafluoroethylene Barrier

P-113: Novel Structure Organic Light-Emitting Diodes with High Performance

Efficient organic light-emitting diodes with teflon as buffer layer

P-113: Society for Information Display: Novel Structure Organic Light-emitting Diodes With High Performance

Efficient light emitting diodes with Teflon buffer layer

Efficient Organic Light-Emitting Diode Using Lithium Tetra(8-Hydroxy-Quinolinato) Boron As the Electron Injection Layer

Effective Intermediate Layers for Highly Efficient Stacked Organic Light-Emitting Devices

Improved Performance of Organic Light-Emitting Diodes with MgF 2 As the Anode Buffer Layer

Bipolar TADF Interlayer for High Performance Hybrid WOLEDs with an Ultrathin Non-Doped Emissive Layer Architecture

Efficient 1.54μm Light Emitting Diode with Nanometer Thick Polycrystalline Si Anode and Organic Sandwich Structure

Efficient Blue Organic Light-Emitting Diodes Employing Thermally Activated Delayed Fluorescence

Improved Performance of Alq(3)-based Organic Light-Emitting Diode with Multi-Layer Structure

Highly Efficient Top-Emitting Organic Light-Emitting Devices with Aluminium Electrodes

Red Doped Organic Light-Emitting Diodes with Teflon Buffer Layer

Improved efficiency of organic light-emitting devices employing bathocuproine doped in the electron-transporting layer

Enhancement of Electron Injection in Organic Light-Emitting Devices Using an Ag/LiF Cathode