Abstract:Synthesis of blue organic light-emitting materials is very important for practical applications of(organic) light-emitting diodes(OLEDs).Organometallic complex lithium tetra-(8-hydroxy-quinolinato) boron(LiBq_4) was synthesized,purified and used as light-emitting material.Blue ITO/PVK∶TPD/LiBq_4/Alq_3/Al OLED was fabricated adopting spin and vacuum deposition,and the electroluminescence spectrum was(measured) at different operation voltage.At the same time,the influence of thickness of Alq_3,CuPc and LiF on the luminescence properties of blue OLEDs was studied.Results indicated that,the peak wavelength of(fluorescence) spectrum for LiBq_4 is about 452 nm under excitation of 350 nm.The peak wavelength of(electroluminescence) spectrum for blue OLED ITO/PVK∶TPD/LiBq_4/Alq_3/Al device locates at 475 nm,and one weak shoulder peak appears at about 500 nm,this is resulted from excitation of Alq_3.The luminance of this blue OLED can reach 430 cd/m~2 at 25 V operate voltage.As electron transfer material,the thickness of Alq_3 film has distinct influence on the electroluminescence spectra and luminance of blue OLEDs.Through(adjusting) the thickness of Alq_3 layer,the recombination region of holes and electrons can be restricted in LiBq_4,and the shoulder peak will weaken and disappear.The optimal thickness of Alq_3 film is about 10 nm.(Although) the addition of CuPc between ITO and PVK∶TPD could enhance the injection ability of holes,(simultaneously) induces the imbalance injection of charge carriers,and deteriorates the properties of blue OLED.The addition of LiF thin film between Alq_3 and Al cathode could enhance the injection ability of(electrons,) and makes the injection of electrons reach equilibrium with holes.So the recombination probability of holes and electrons was improved and the luminance of blue OLED was improved evidently.These results were explained with the schematic energy level structure of the blue OLEDs.

Efficient Organic Light-Emitting Diode Using Lithium Tetra(8-Hydroxy-Quinolinato) Boron As the Electron Injection Layer

Lithium Cobalt Oxide As Electron Injection Material for High Performance Organic Light-Emitting Diodes

P-113: Novel Structure Organic Light-Emitting Diodes with High Performance

Organic light-emitting devices with a 2-(4-biphenyl)-5-(4-butylphenyl)-1,3,4-oxadiazole layer between the α-naphtylphenyliphenyl diamine and 8-hydroxyquinoline aluminum

Investigation of Novel Efficient Electron Injection Lithium Complex Containing Quinoxaline Moiety for Organic Light-Emitting Diodes

Efficient Single-Active-Layer Organic Light-Emitting Diodes With Fluoropolymer Buffer Layers

P-113: Society for Information Display: Novel Structure Organic Light-emitting Diodes With High Performance

Novel phosphine oxide-based electron-transporting materials for efficient phosphorescent organic light-emitting diodes

Efficient Blue Organic Light-Emitting Diodes with Simple Structure Based on N, N '-Bis (1-Naphthyl)-n, N '-Biphenyl-1, 1 '-Biphenyl-4,4 '-Diamine

Improved Performance of Alq(3)-based Organic Light-Emitting Diode with Multi-Layer Structure

Synthesis and Luminescence Properties of Blue Organic Light-emitting Material LiBq4

High performance organic light-emitting diodes with LiCoO2 as an electron injection layer

Highly Power Efficient Organic Light-Emitting Diodes Based on P-Doped and Novel N-Doped Carrier Transport Layers

The enhanced electron injection by fluorinated tris-(8-hydroxy-quinolinato) aluminum derivatives in high efficient Si-anode OLEDs

Improvement of Electron–hole Injection Balance in Si-anode Organic Light-Emitting Diodes by Using Enhanced Electron Injection Organic of Fluorinated Tris-(8-hydroxy-quinolinato) Aluminum

Bilayer Electroluminescent Devices of Langmuir-Blodgett Films of Amphiphilic Complex Derivated from 8-Hydroxyquinoline Lanthanum

Bright Single-Active Layer Small-Molecular Organic Light-Emitting Diodes with a Polytetrafluoroethylene Barrier

Highly Efficient Organic Light Emitting Devices with Insulator MnO As an Electron Injecting and Transporting Material

Electron Blocking and Hole Injection: the Role of N,N′-Bis(naphthalen-1-y)-N,N′-bis(phenyl)benzidine in Organic Light-Emitting Devices

Investigation of an efficient YbF3/Al cathode for tris-(8-hydroxyquinoline)aluminum-based small molecular organic light-emitting diodes

Improved Hole Injection And Transport Of Organic Light-Emitting Devices With An Efficient P-Doped Hole-Injection Layer