Abstract:The injection and transporting characteristics of an Al/metal fluoride (or Alq(3): Cs2CO3)/Alq(3)/Al electron-only device are determined by the dark injection space-charge-limited current (DI-SCLC)method. The deviation from the ratio of peak current density J(DI) to the steadystate current density J(SS) for the ideal ohmic contact, which should be 1.21, was obtained to compare the effects of modifications by four metal fluoride films and Alq(3) doped with Cs2CO3 on the injection of electrons. The value of J(DI)/J(SS), 1.29, for the device modified by 0.5 nm LiF approaches the ideal value of 1.21, confirming the formation of quasic-ohmic contact between the organic layer and cathode, although the deviation increases significantly with the thickening of the film. The value of J(DI)/J(SS) for the device modified by NaF remains stable within 1.6 in a wide NaF film thickness range of 0-2 nm. The minimum value of J(DI)/J(SS), for Alq(3): Cs2CO3 doped film is 1.24, which means that the theoretical ohmic contact between the organic layer and cathode is formed. These characterization results are consistent with the observations in steady-state current-voltage(J-V) experiments. The great electron injection enhancements in the devices pave the way for an application of the cathodic injection in the preparation of OLEDs which are confirmed by doping Alq(3) with Cs2CO3.

Investigation of Novel Efficient Electron Injection Lithium Complex Containing Quinoxaline Moiety for Organic Light-Emitting Diodes

Lithium Cobalt Oxide As Electron Injection Material for High Performance Organic Light-Emitting Diodes

Efficient Organic Light-Emitting Diode Using Lithium Tetra(8-Hydroxy-Quinolinato) Boron As the Electron Injection Layer

Organic LED Based on a Novel Cohost Electron Transport Layer

P-113: Novel Structure Organic Light-Emitting Diodes with High Performance

A hydroxyphenyloxadiazole lithium complex as a highly efficient blue emitter and interface material in organic light-emitting diodes

Investigation of an efficient YbF3/Al cathode for tris-(8-hydroxyquinoline)aluminum-based small molecular organic light-emitting diodes

Investigation on Excited-State Properties and Electroluminescence Performance of Donor−Acceptor Materials Based on Quinoxaline Derivatives

Novel phosphine oxide-based electron-transporting materials for efficient phosphorescent organic light-emitting diodes

P-113: Society for Information Display: Novel Structure Organic Light-emitting Diodes With High Performance

Enhanced Electron Injection in Organic Light-Emitting Devices by Using a Composite Electron Injection Layer Composed of 8-Hydroquinolatolithium and Cesium Oxide

Enhanced Performance in Organic Light‐emitting Diodes with Copolymers Containing Both Tris(8‐hydroxyquinoline) Aluminum and 8‐hydroxyquinoline Lithium Groups

Luminescent Enhancement of Heterostructure Organic Light-Emitting Devices Based on Aluminum Quinolines

Enhanced Brightness and Efficiency in Organic Light-Emitting Devices Using an Lif-Doped Electron-Injecting Layer with Aluminium Cathode

Electron injection and electroluminescence investigation of organic light-emitting devices based on a Sn/Al cathode

Performance Enhanced OLEDs Using a Li3N Doped Tris(8-Hydroxyquinoline) Aluminum(Alq3) Thin Film as Electron-Injecting and Transporting Layer

Quinacridone Sub-Monolayer As Efficient Emitter in OLEDs

Electron Injection Characteristics of a Cathodic Interface for an Organic Light Emitting Diode in a Dark Injection Space-Charge-limited Current Experiment

Phenanthroimidazole-derivative Semiconductors As Functional Layer in High Performance OLEDs

Small-molecule Amine Compound As Electron-Injection Layer for Organic Light-Emitting Diodes

Improvement of Electron–hole Injection Balance in Si-anode Organic Light-Emitting Diodes by Using Enhanced Electron Injection Organic of Fluorinated Tris-(8-hydroxy-quinolinato) Aluminum