Abstract:A facile way to fabricate highly efficient organic light emitting devices (OLEDs) with insulator MnO as an electron injecting and transporting material was devised, which eliminates the problem of the oxidation of reactive dopants. The power efficiency of 1.1 lm/W by inserting 3-nm-thick MnO as the electron injecting layer was obtained, higher than the 0.8 lm/W efficiency for the reference device with 0.5-nm-thick LiF. A thermal co-evaporation layer containing 10% weight of MnO and tris(8-hydroxyquinolato) aluminum (Alq(3)) as the electron transporting layer showed more efficient electron transport ability, with turn-on voltage of 3.8 V, lower than 7.4 V for the intrinsic Alq3. Meanwhile, the insertion of thin MnO layer between organic photoactive layer and inorganic metal electrode significantly improved performance and stability of organic solar cell compared to device without it. The power conversion efficiency (PCE) of 2.91% by inserting 3-nm-thick MnO was obtained, higher than the 0.91% efficiency for the device without it, and 2.59% for the device with 0.5-nm-thick LiF. Charge transport of rhenium trioxide (ReO3) in organic electronic devices was investigated. The hole injection/transport was blocked and the electron injection/transport was enhanced with doping of ReO3 in organic electronic devices. Thus the charge balance and efficiency of the OLED were improved, 2.7 cd/A of current efficiency (CE) at 20 mA/cm(2) for the device with ReO3 was higher than 1.5 cd/A for the device without it. In the case of organic photovoltaic cells (OPV), the open-circuit voltage (V-oc), 0.58 V, was higher compared to the device without ReO3 (0.44 V) due to the improvement of interface properties. The PCE was increased to 2.27% by the combination of ReO3 (increasing V-oc) with poly(3,4-ethylene dioxythiophene): poly(styrene-sulfonate) (PEDOT:PSS) (improve hole transport to increase J(sc)) on the modification of the anode, higher than 1.85% for the device without ReO3.

Highly Efficient Organic Light Emitting Devices with Insulator MnO As an Electron Injecting and Transporting Material

N-Type Doping in Organic Electronic Devices

Enhancement In Electron Injection And Transport Of Organic Light Emitting Diodes Using Mno

Insulator MnO: Highly efficient and air-stable n-type doping layer for organic photovoltaic cells

Novel phosphine oxide-based electron-transporting materials for efficient phosphorescent organic light-emitting diodes

Highly Power Efficient Organic Light-Emitting Diodes Based on P-Doped and Novel N-Doped Carrier Transport Layers

Lithium Cobalt Oxide As Electron Injection Material for High Performance Organic Light-Emitting Diodes

Efficient Organic Light-Emitting Diode Using Lithium Tetra(8-Hydroxy-Quinolinato) Boron As the Electron Injection Layer

Bipolar TADF Interlayer for High Performance Hybrid WOLEDs with an Ultrathin Non-Doped Emissive Layer Architecture

P-113: Novel Structure Organic Light-Emitting Diodes with High Performance

Highly Efficient Nondoped Green Organic Light-Emitting Diodes with Combination of High Photoluminescence and High Exciton Utilization

P-113: Society for Information Display: Novel Structure Organic Light-emitting Diodes With High Performance

A highly transparent laminated composite cathode for organic light-emitting diodes

Highly efficient and bright doped organic electroluminescent diodes using an aluminum electrode

Aqueous solution processed transition-metal-doped ZnO as electron injection layers for efficient inverted organic light emitting diodes

Single-layer Small Molecular Organic Light Emitting Diodes Without Hole Transport Layer

Nanocomposite Electron-Transport Layer Incorporated Highly Efficient OLED

Efficient Nondoped Organic Light-Emitting Diodes with CuI Complex Emitter

High performance organic light-emitting diodes with LiCoO2 as an electron injection layer

High-efficiency organic light emitting diodes using high-index transparent electrode

Low-voltage Top-Emitting Organic Light-Emitting Devices with an Organic Double-Heterojunction Structure