Abstract:A facile way to fabricate highly efficient organic light emitting devices (OLEDs) with insulator MnO as an electron injecting and transporting material was devised, which eliminates the problem of the oxidation of reactive dopants. The power efficiency of 1.1 lm/W by inserting 3-nm-thick MnO as the electron injecting layer was obtained, higher than the 0.8 lm/W efficiency for the reference device with 0.5-nm-thick LiF. A thermal co-evaporation layer containing 10% weight of MnO and tris(8-hydroxyquinolato) aluminum (Alq(3)) as the electron transporting layer showed more efficient electron transport ability, with turn-on voltage of 3.8 V, lower than 7.4 V for the intrinsic Alq3. Meanwhile, the insertion of thin MnO layer between organic photoactive layer and inorganic metal electrode significantly improved performance and stability of organic solar cell compared to device without it. The power conversion efficiency (PCE) of 2.91% by inserting 3-nm-thick MnO was obtained, higher than the 0.91% efficiency for the device without it, and 2.59% for the device with 0.5-nm-thick LiF. Charge transport of rhenium trioxide (ReO3) in organic electronic devices was investigated. The hole injection/transport was blocked and the electron injection/transport was enhanced with doping of ReO3 in organic electronic devices. Thus the charge balance and efficiency of the OLED were improved, 2.7 cd/A of current efficiency (CE) at 20 mA/cm(2) for the device with ReO3 was higher than 1.5 cd/A for the device without it. In the case of organic photovoltaic cells (OPV), the open-circuit voltage (V-oc), 0.58 V, was higher compared to the device without ReO3 (0.44 V) due to the improvement of interface properties. The PCE was increased to 2.27% by the combination of ReO3 (increasing V-oc) with poly(3,4-ethylene dioxythiophene): poly(styrene-sulfonate) (PEDOT:PSS) (improve hole transport to increase J(sc)) on the modification of the anode, higher than 1.85% for the device without ReO3.

Enhancement In Electron Injection And Transport Of Organic Light Emitting Diodes Using Mno

Highly Efficient Organic Light Emitting Devices with Insulator MnO As an Electron Injecting and Transporting Material

Organic Excitonic State Management by Surface Metallic Coupling of Inorganic Lanthanide Nanocrystals.

N-Type Doping in Organic Electronic Devices

Improving Electron Injection of Organic Light-Emitting Transistors via Interface Layer Design

Insulator MnO: Highly efficient and air-stable n-type doping layer for organic photovoltaic cells

Optical enhancement of the highly-efficient organic-inorganic oxyfluoride red phosphor via cation co-doping strategy

Novel phosphine oxide-based electron-transporting materials for efficient phosphorescent organic light-emitting diodes

Lithium Cobalt Oxide As Electron Injection Material for High Performance Organic Light-Emitting Diodes

Enhancement In Brightness And Efficiency Of Organic Electroluminescent Device Using Novel N,N-Di(9-Ethylcarbaz-3-Yl)-3-Methylaniline As Hole Injecting And Transporting Material

Investigation of Energy Transfer and Charge Trapping in Dye-Doped Organic Light-Emitting Diodes by Magneto-Electroluminescence Measurement

Mechanisms of Injection Enhancement in Organic Light-Emitting Diodes Through Insulating Buffer

Unlocking the Potential of Organic-Inorganic Hybrid Manganese Halides for Advanced Optoelectronic Applications

Enhancement of Electron Injection in Organic Light-Emitting Devices Using an Ag/LiF Cathode

In situ-formed tetrahedrally coordinated double-helical metal complexes for improved coordination-activated n-doping

Doping of ZnO Electron Transport Layer with Organic Dye Molecules to Enhance Efficiency and Photo‐Stability of the Non‐Fullerene Organic Solar Cells

Enhanced Brightness and Efficiency in Organic Electroluminescent Device Using Tio2 Self-Assembled Layers

Modifying Organic/metal Interface Via Solvent Treatment to Improve Electron Injection in Organic Light Emitting Diodes

Air Stable Organic Salt As an n-Type Dopant for Efficient and Stable Organic Light-Emitting Diodes

Modification of the organic/La0.7Sr0.3MnO3 interface by in situ gas treatment

Aqueous solution processed transition-metal-doped ZnO as electron injection layers for efficient inverted organic light emitting diodes