Abstract:Organic-organic heterostructures have been widely applied in various organic electronic devices, including organic light-emitting diodes (OLEDs), organic field-effect transistors (OFETs), and organic solar cells. A thorough understanding of the interface effect in these heterostructures is of crucial importance for device design and optimization. However, owing to the diverse chemical properties and weak van der Waals interactions of organic semiconductors, interface charge transport is critically related to the organic-organic electronic structure and environmental atmosphere. Therefore, an in situ real-time investigation of the electrical properties in vacuum could efficiently avoid atmospheric influence and aid determination of the instinct interactions at the organic-organic interface. Herein, we report in situ real-time electrical property monitoring of the pentacene/vanadyl phthalocyanine (VOPc) heterostructure with top layer pentacene growth. The hole mobility of the heterostructure transistors decreases from 0.4 cm2 center dot V-1 center dot s-1 to approximately 0.2 cm2 center dot V-1 center dot s-1, while the electron mobility increases rapidly from 0.01 cm2 center dot V-1 center dot s-1 to approximately 0.9 cm2 center dot V-1 center dot s-1 as the pentacene thickness increases. This enhanced electron transport is attributed to the interface electron transfer from pentacene to VOPc, leading to filling of trap states in the VOPc layer and an improvement in the charge mobility and n-channel current. In contrast, the ex situ processing results indicate that atmospheric exposure will significantly suppress this charge transfer effect, resulting to a negligible improvement in the electron transport. The film morphology, Kelvin probe force microscopy, and X-ray photoelectron spectroscopy characterizations suggest electron transfer occurs from pentacene to VOPc. Additionally, density functional theory (DFT) calculations confirm that the interaction between pentacene and VOPc is strong and the pentacene molecule tends to transfer electrons to VOPc with a calculated charge transfer value of approximately 0.15 e. Moreover, this interface charge transfer is significantly suppressed with the presence of either O2 or H2O, which is highly consistent with our experiment results. In this paper, we provide a clear understanding of the instinct organic-organic interface charge transfer effect by using in situ characterization, which will be helpful for further device performance optimization and analysis.

Modification of the organic/La0.7Sr0.3MnO3 interface by in situ gas treatment

Manipulating Spin Injection into Organic Materials Through Interface Engineering

Improving Electron Injection of Organic Light-Emitting Transistors via Interface Layer Design

Modifying Organic/metal Interface Via Solvent Treatment to Improve Electron Injection in Organic Light Emitting Diodes

The In Situ Optimization of Spinterface in Polymer Spin Valve by Electronic Phase Separated Oxides

FABRICATION OF LATERAL ORGANIC SPIN VALVES BASED ON La0.7Sr0.3MnO3 ELECTRODES

In Situ and Ex Situ Investigation of the Organic-Organic Interface Effect

Evolution of the Electronic Structure of C60/La0.67Sr0.33MnO3 Interface

Magnetic-Field-Dependent Carrier Injection at La2/3Sr1/3MnO3/ and Organic Semiconductors Interfaces

Tuning Layer-Structured La0.6sr1.4mno4+Delta Into A Promising Electrode For Intermediate-Temperature Symmetrical Solid Oxide Fuel Cells Through Surface Modification

Manipulation of an ionic and electronic conductive interface for highly-stable high-voltage cathodes

Enhancement In Electron Injection And Transport Of Organic Light Emitting Diodes Using Mno

Formation of MoO 3 /Organic Interfaces

Modification of the Hole Injection Barrier in Organic Light-Emitting Devices Studied by Ultraviolet Photoelectron Spectroscopy

In Situ Assembled La0.8Sr0.2MnO3 Cathodes on a Y2O3–ZrO2 Electrolyte of Solid Oxide Fuel Cells – Interface and Electrochemical Activity

Oxygen vacancy induced electronic structure variation in the La0.2Sr0.8MnO3 thin film

The Interface Analyses Of Inorganic Layer For Organic Electroluminescent Devices

Scavenging of oxygen vacancies at modulation-doped oxide interfaces: Evidence from oxygen isotope tracing

Alleviation of O2 competition with NO in electrochemical reduction through nanoceria supported on LSM cathode

Spin filtering of a termination-controlled LSMO/Alq3 heterojunction for an organic spin valve

Surface Atomic Decoration of a Manganite to a Modulable Oxygen Evolution Reaction