Abstract:A facile way to fabricate highly efficient organic light emitting devices (OLEDs) with insulator MnO as an electron injecting and transporting material was devised, which eliminates the problem of the oxidation of reactive dopants. The power efficiency of 1.1 lm/W by inserting 3-nm-thick MnO as the electron injecting layer was obtained, higher than the 0.8 lm/W efficiency for the reference device with 0.5-nm-thick LiF. A thermal co-evaporation layer containing 10% weight of MnO and tris(8-hydroxyquinolato) aluminum (Alq(3)) as the electron transporting layer showed more efficient electron transport ability, with turn-on voltage of 3.8 V, lower than 7.4 V for the intrinsic Alq3. Meanwhile, the insertion of thin MnO layer between organic photoactive layer and inorganic metal electrode significantly improved performance and stability of organic solar cell compared to device without it. The power conversion efficiency (PCE) of 2.91% by inserting 3-nm-thick MnO was obtained, higher than the 0.91% efficiency for the device without it, and 2.59% for the device with 0.5-nm-thick LiF. Charge transport of rhenium trioxide (ReO3) in organic electronic devices was investigated. The hole injection/transport was blocked and the electron injection/transport was enhanced with doping of ReO3 in organic electronic devices. Thus the charge balance and efficiency of the OLED were improved, 2.7 cd/A of current efficiency (CE) at 20 mA/cm(2) for the device with ReO3 was higher than 1.5 cd/A for the device without it. In the case of organic photovoltaic cells (OPV), the open-circuit voltage (V-oc), 0.58 V, was higher compared to the device without ReO3 (0.44 V) due to the improvement of interface properties. The PCE was increased to 2.27% by the combination of ReO3 (increasing V-oc) with poly(3,4-ethylene dioxythiophene): poly(styrene-sulfonate) (PEDOT:PSS) (improve hole transport to increase J(sc)) on the modification of the anode, higher than 1.85% for the device without ReO3.

Air Stable Organic Salt As an n-Type Dopant for Efficient and Stable Organic Light-Emitting Diodes

N-Type Doping in Organic Electronic Devices

Expanding the Hole Delocalization Range in Excited Molecules for Stable Organic Light-Emitting Diodes Employing Thermally Activated Delayed Fluorescence

Doped Organic Semiconductors: Physics and Application in Light Emitting Diodes

(2,2′-Binaphthyl-6,6′-diyl)bis(diphenylphosphine Oxide) As a Potentially Simple and Efficient Electron-Transport Layer for Stable Organic Light-Emitting Diodes

Improving the Performance of OLEDs by Using a Low-Temperature-evaporable N-Dopant and a High-Mobility Electron Transport Host.

Thermally Stable Inverted Organic Light-Emitting Diodes Using Ag-doped 4,7-Diphenyl-1,10-phenanthroline As an Electron Injection Layer

Controllable molecular doping in organic single crystals toward high-efficiency light-emitting devices

Triarylphosphine Oxide–phenanthroline Molecular Conjugate As a Promising Doped Electron-Transport Layer for Organic Light-Emitting Diodes

A High Tg Small-Molecule Arylamine Derivative As a Doped Hole-Injection/transport Material for Stable Organic Light-Emitting Diodes

Enhanced Electron Current in Inverted Organic Light Emitting Diodes with an N-Doped Electron Transport Layer Adopting High and Low Doping Levels

Improved performances of the organic light-emitting devices by doping in the mixed layer

Phenanthroimidazole-derivative Semiconductors As Functional Layer in High Performance OLEDs

Organic LED Based on a Novel Cohost Electron Transport Layer

Low Driving Voltage of Organic Light-Emitting Diodes Using P -Doping Starburst Amine As Hole Transporter

33.3: Invited Paper: OLEDs with Doped Transport Layers for Highly Efficient Displays

Achieving Hybridized Local and Charge-Transfer Excited State and Excellent OLED Performance Through Facile Doping

Excellent n-type light emitters based on AIE-active silole derivatives for efficient simplified organic light-emitting diodes

Low Voltage Organic Light-Emitting Diodes By Doped Amorphous Hole Transport Layers

Enhanced Brightness and Efficiency in Organic Light-Emitting Devices Using an Lif-Doped Electron-Injecting Layer with Aluminium Cathode

Performance Enhanced OLEDs Using a Li3N Doped Tris(8-Hydroxyquinoline) Aluminum(Alq3) Thin Film as Electron-Injecting and Transporting Layer