Abstract:It is difficult to enhance the blue or purple luminescence efficiency of organic light-emitting device ( OLED) for practice display applications. In this work, aluminum nano particles (Al-NPs) are inserted into the light-tight TmPyPb electron transporting layer (ETL) of ITO/PEDOT:PSS/TAPC/BCzVBi:BCPO/TmPyPb/Liq/Al OLEDs, in which BCzVBi can emit deep-blue fluorescent light, with the attempts to overcome the above deficiency through the local surface plasmon polariton(LSPP) effect excited in Al-NP at higher resonance frequencies by the luminescence radiations from BCzVBi. The distances of Al-NPs from BCzVBi:BCPO fluorescent layer are chosen as x = 4, 8, 12 nm. The morphologies observed by atom force microscope and scan electron microscope show that the Al film with a thickness of 1 nm, deposited at room temperature by vacuum heat evaporate, is composed of separated Al grains (therefore, called Al-NPs) with sizes on a 10 nm scale. By inserting these Al-NPs into the TmPyPb ETL, both the current density and luminance at the same voltage decrease in comparison with the counterparts of reference devices (i.e. ones without Al-NPs) due to the worsened carrier mobility. However, the current density and luminance both rebound significantly at x = 8 nm. This may be due to the fact that the fluorescence quenching strongly occurs at x < 8 nm, and on the other hand, the local surface plasmon polariton is weakened too much at x > 8 nm due to attenuated radiation from BCzVBi. At x = 8 nm, the voltage (9 V) at which the luminance reaches a maximum value is the same as that for the reference device, but the maximum luminance itself decreases from 4200 Cd/m 2 to 3500 Cd/m 2 . However, the current density also decreases from 335.19 mA/cm 2 to 145.71 mA/cm 2 . This conversely results in a promising great increase of current efficiency from 0.88 Cd·A –1 to 2.36 Cd·A –1 . Subsequently, the external quantum efficiency (EQE) is enhanced by 170%, while the efficiency roll-off ratio decreases from 78% to 30.5%, with a decrement of 61% . At a high current density of 270 mA/cm 2 , EQE enhances 66.5%. The coupling between fluorescence excitation state and local surface plasmon polariton is determined by the overlapping between fluorescence emitting peak and plasmon resonance peak. As aluminum has a number density of free electrons, 18.1×10 22 cm –3 , much larger than those for the other normally used metals (such as gold and silver), its spectrum of local surface plasmon polariton is enough to cover the fluorescence wavelength range of BCzVBi. These research results show that the luminescence efficiency of deep-blue OLEDs can be turned better by LSPP excited in Al-NPs at higher resonance frequencies.

Synthesis and Luminescence Properties of Blue Organic Light-emitting Material LiBq4

Efficient Organic Light-Emitting Diode Using Lithium Tetra(8-Hydroxy-Quinolinato) Boron As the Electron Injection Layer

Studies on the Performances of Blue Organic Electroluminescent Device with Different Electron Transport Layers

High Fluorescence Rate of Thermally Activated Delayed Fluorescence Emitters for Efficient and Stable Blue OLEDs

Design of Efficient Thermally Activated Delayed Fluorescence Materials for Pure Blue Organic Light Emitting Diodes.

Extremely Stable Deep-Blue Organic Light-Emitting Diodes Employing Diindolophenazine-Based Fluorophore with Narrow-Band Emission and a Shallow LUMO Level

Blue organic light emitting diode materials based on different light-emitting groups

High bright blue organic light-emitting diodes based on a novel silole derivative

Improving Performance Of Deep-Blue Oled By Inserting Ultra-Thin Lif Between Hole-Blocking And Electron-Transporting Layers

Influence of High-frequency localized surface plasmon polariton effect of Al nanoparticles on luminescence efficiency of deep-blue BCzVBi OLED

Quantum-Dot Blue Light Emitting Diodes Utilizing Organic/Inorganic Hybrid Structures

High-frequency localized surface plasmon polariton effects of Al nanoparticles on deep-blue BCzVBi OLEDs

Blue organic electroluminescent device with tetra(β-naphthyl)silane as hole blocking materials

P-113: Novel Structure Organic Light-Emitting Diodes with High Performance

Novel Blue Organic Light-emitting Diodes and Materials

Blue Organic Electroluminescent Device with an Al/LiF Bilayer Electrode

Highly Efficient Organic Blue Electroluminescent Materials and Devices with Mesoscopic Structures

The colour-tuning effect of 2,9-dimethyl-4,7-diphenyl-1, 10-phenanthroline in blue–red organic light-emitting devices

Blue Emission from Light-Emitting Diodes Based on Lithium Complex

Pure green and narrow bandwidth electroluminescence from organic light-emitting diodes

P-113: Society for Information Display: Novel Structure Organic Light-emitting Diodes With High Performance