Abstract:Organic light-emitting diode (OLED) has attracted considerable attention due to their unique image quality and market potentials in display field. Efficient blue, green and red emitters with excellent color purity are required for full-color display application, so far great improvements have been achieved for the life time and efficiency of the red and green materials. However, the blue emitting material is still a barrier to commercial applications of OLEDs.Using vacuum thermal evaporation method, blue OLEDs were fabricated by inserting a bathocuproine (BCP) as hole blocking layer (HBL) into conventional double layer (DL) device at the interface of N,N′-bis-(1-naphthyl)-N,N′-biphenyl-1,1′-biphenyl-4,4′-diamine (NPB)/8-hydroxyquinoline aluminum (Alq3). Device structure is indium tin oxide (ITO)/NPB/BCP/Alq/Mg∶Ag, where NPB acts as both hole transporting layer (HTL) and emitting layer (EML), and Alq3 as electron transport layer (ETL). The active emissive area of each device defined by the overlap of ITO and Mg∶Ag was 4 mm×4 mm. Measurements of luminance-voltage (L-V) and current density-voltage (J-V) characteristics were carried out with a Keithley 4200 Semiconductor Characterization System, photoluminescence (PL) and electroluminescence (EL) spectra were measured with an OPT-2000 system. The luminance-voltage and current density-voltage characteristics of devices were investigated, and dif-ferences between their performances were discussed. The results demonstrate that the maximum luminance and luminance efficiency of the BCP device are 2 900 cd/m2 and 0.55 lm/W, respectively. The peak of electroluminescence (EL) spectrum locates at 445 nm and the Commissions Internationale d′Eclairage (CIE) coordinates are (x=0.16, y=0.09), which are independent on the variation of bias voltage. Energy level diagrams were employed to analyze the diversity of device performance with different structures. We find that the high EL performance of the BCP device is attributed to better balance of carriers in the NPB layer by inserting BCP as hole blocking layer (HBL). Optimization of device structure and performance, via adjusting thickness of organic layers, is under investigation.

Blue organic electroluminescent device with tetra(β-naphthyl)silane as hole blocking materials

Efficient Blue Electroluminescent Device Using Tetra(β-Naphthyl)silane As a Hole-Blocking Material

High bright blue organic light-emitting diodes based on a novel silole derivative

Fabrication and Characterization of Blue Organic Light-emitting Diodes Based on N,N′-bis-(1-naphthyl)-N,N′-biphenyl-1,1′-biphenyl-4,4′-diamine

Efficient Blue Organic Light-Emitting Diodes with Simple Structure Based on N, N '-Bis (1-Naphthyl)-n, N '-Biphenyl-1, 1 '-Biphenyl-4,4 '-Diamine

Extremely Stable Deep-Blue Organic Light-Emitting Diodes Employing Diindolophenazine-Based Fluorophore with Narrow-Band Emission and a Shallow LUMO Level

Color-tunable Organic Light-Emitting Devices Using a Thin N,N′-bis-(1-naphthyl)-N,N′-diphenyl-1,1′-biphenyl-4,4′-diamine Layer at Heterojunction Interface

Blue organic light-emitting diode based on 1,2,3,4,5-pentaphenyl-1-(8-phenyl-1,7-octadiynyl)silole

High efficiency and color saturated blue electroluminescence by using 4,4′-bis[N-(1-naphthyl)-N-phenylamino]biphenyl as the thinner host and hole-transporter

Design of Efficient Thermally Activated Delayed Fluorescence Materials for Pure Blue Organic Light Emitting Diodes.

High-efficiency Blue-Emitting Organic Light-Emitting Devices with 4, 4′, 4″-Tris(n-carbazolyl)-triphenylamine As the Hole/exciton-Blocking Layer

Efficient Blue Organic Light-Emitting Diodes Employing Thermally Activated Delayed Fluorescence

An Efficient Blue Organic Light Emitting Structure

Highly Efficient and Stable Pure Blue Nondoped Organic Light-Emitting Diodes at High Luminance Based on Phenanthroimidazole-Pyrene Derivative Enabled by Triplei-Triplet Annihilation

Efficient Blue Organic Light-Emitting Devices with a New Bipolar Emitter

Influence of doped materials on the performance of blue organic electroluminescent devices

Polyphenylnaphthalene as a Novel Building Block for High-Performance Deep-Blue Organic Light-Emitting Devices

A novel 1,5-naphthylenediamine derivative as potential organic blue light-emitting material

Highly efficient blue electroluminescence based on a new anthracene derivative

Electron Blocking and Hole Injection: the Role of N,N′-Bis(naphthalen-1-y)-N,N′-bis(phenyl)benzidine in Organic Light-Emitting Devices

Synthesis of Solution-Processable Propeller-Shaped Oligomers Based on Trinaphthylbenzene and Their Application in Blue Organic Light-Emitting Diodes