Abstract:Organic electroluminescence is one of the most promising technology for next generation of flat panel display. Hole transporting layer represents the weakest link in the electroluminescent structure considering the thermal stability of the materials. The most widely used hole transporting material, N,N'-bis (1-naphthyl)-N, N'-diphenyl-1, 1'-biphenyl-4, 4'-diamine (NPB), has a glass transition temperature ( Tg) of 95℃, which is much lower than that of the electron transporting material, tris (8- hydroxyquinoline) aluminum (Alq3) . Based on the good hole transporting property and suitable energy level matched with other materials of NPB, two new hole transporting materials: N, N'-bis(1-naphthyl)- N,N'-di(4-methylphenyl)-1,1'-biphenyl-4, 4'-diamine (NTB) and N, N'-bis(1-naphthyl)-N, N'-di(4- tert-butylphenyl)-1, 1'-biphenyl-4, 4'-diamine (NBB) were synthesized by introducing methyl and tert- butyl groups into NPB to improve its thermal stability. The glass transition temperature (Tg) of NTB and NBB measured by DSC are 108℃ and 129℃ respectively, showing better thermal stability than that of NPB. The ionization energy obtained by ultraviolet photoemission spectroscopy is 5. 2eV for all of NPB and its derivatives. The emission peak in the photoluminescent spectra of the solid films of NTB and NBB are at 455nm and 460nm, which are close to the emission peak of NPB at 440nm. The organic electroluminescent devices using NPB, NTB and NBB as hole transporting layer (HTM) were fabricated with the structure of ITO/CuPc(20nm)/HTM(50nm)/Alq3(60nm)/LiF(0.5nm)/Al(100nm). The emission spectra of the three devices are the same and the green color light was emitted from the Alq3 layer. The turn-on voltages of the devices are 11, 9, 8V for NPB, NTB and NBB, respectively. The brightness of the devices at 15V are 1 000, 1 300, 1 200cd/m2 for NPB, NTB and NBB. The devices with NTB and NBB also show better longevity than that of NPB in a prelimin ary test.

Pure green and narrow bandwidth electroluminescence from organic light-emitting diodes

ORGANIC ELECTROLUMINESCENT THIN FILM DEVICES USING ORGANIC COMPLEX OF RARE-EARTH TERBIUM Tb(acac)2(AA)phen AS EMITTING LAYER

Organic Electroluminescent Devices Using Eu3+ Complex As Red Emitting Layer

Synthesis of Thermal Stable Organic Hole Transporting Materials for Use in Electroluminescent Devices

Bright Green Organic Electroluminescent Devices Based on a Novel Thermally Stable Terbium Complex

Green electroluminescence generated from the thin film based on a soluble lanthanide complex

Novel phosphine oxide-based electron-transporting materials for efficient phosphorescent organic light-emitting diodes

Extremely Stable Deep-Blue Organic Light-Emitting Diodes Employing Diindolophenazine-Based Fluorophore with Narrow-Band Emission and a Shallow LUMO Level

Highly Efficient Green Organic Light-Emitting Devices Based on Terbium Complex by Employing Hole Block Material As Host

Green light-emitting organic material with narrow FWHM and high electroluminescence

Pure red organic electroluminescent devices using a novel europium(III) complex as emitting layer

Molecular‐Structure and Device‐Configuration Optimizations toward Highly Efficient Green Electroluminescence with Narrowband Emission and High Color Purity

Blue organic electroluminescent devices based on a distyrylarylene derivative as emitting layer and a terbium complex as electron-transporting layer

Green Phosphorescent Organic Electroluminescent Devices With 27.9% External Quantum Efficiency By Employing A Terbium Complex As A Co-Dopant

Organic light-emitting devices based on two novel silole derivatives

Electroluminescence from Exciplex on the Interface Between Tpd and La (pmip)(3) (Bipy)

Enhanced Brightness of Eu3+ Complex in Organic Electroluminescent Devices by Using Another Rare-Earth Ion

Organic electrophosphorescent devices with mixed hole transport material as emission layer

P-113: Novel Structure Organic Light-Emitting Diodes with High Performance

High performance pure blue organic fluorescent electroluminescent devices by utilizing a traditional electron transport material as the emitter

Construction and evaluation of organic electroluminescent devices