Abstract:We have designed a device of new multi-layer structure and carried out the experiment on white light-emitting. In a white organic EL device with multi-layer, generally, white light emission can be obtained by blending blue emission and one or two others with long wavelength such as yellow, red or green emission. Because the energy band of material emitting blue light is broad and the efficiency of it is lower, how to raise the efficiency of blue emission from the white light-emitting device is the key of fabrication of a white organic light-emitting device with pure color, high efficiency and brightness. Therefore, we have designed the new structure of a device reasonably and increased the efficiency of blue light emission effectively and (conveniently). The new multi-layer structure of the device limits blue emission within a very narrow scope (between) hole and electron transport layer, and causes one part of majority holes injected in to be captured by rubrene to combine with electrons in the transport process for yellow emission, and the other part of them to (arrive) the thin layer of DPVBi for increasing blue emission, so raising the efficiency of white light emission (over) blending yellow and blue emission, and enhancing the whole function of the device. From the electroluminescence spectrum, it is found that only the DPVBi and rubrene could emit light but NPB and Alq_3 couldn't. This explains that all energy of Alq_3 is transported to DPVBi and rubrene. The structure of the device is ITO/NPB(35 nm)/DPVBi(4 nm)/Rubrene(0.1 nm)/Alq_3(6 nm)/NPB(5 nm)/DPVBi(4 nm)/Rubrene(0.1 nm)/Alq_3(6 nm)/NPB(5 nm)/DPVBi(4 nm)/Alq_3(35 nm)/LiF(0.5 nm)/Al(200 nm). The commission international De L'Eclariage (CIE) coordination of the devices is very stable at (0.33, 0.34) while the applied voltage varies from 8 V to 14 V. The maximum electroluminescence efficiency is 4.0 cd /A at 10 V. It may be deduced that the reason why the device can emit white light is that blue and yellow emission can be given of by DPVBi and rubrene respectively. There are so characteristics because of the design new multi-structure making the efficiency of blue (emission) increased and the property of the device improved obviously. So we consider that the improvement of emission comes from doping of rubrene leading to carrier transporting from Alq_3 to DPVBi.

The colour-tuning effect of 2,9-dimethyl-4,7-diphenyl-1, 10-phenanthroline in blue–red organic light-emitting devices

Blue and green organic light-emitting devices with various film thicknesses for color tuning

Effect of Exciton Blocking Layers on the Color-Tunable Properties of Organic Light-Emitting Devices

Quantum-Dot Blue Light Emitting Diodes Utilizing Organic/Inorganic Hybrid Structures

Effect of A Thin Layer of Tris (8-Hydroxyquinoline) Aluminum Doped with 4-(Dicyanomethylene)-2-t-butyl-6-(1,1,7,7-tetramethyljulolidyl-9-enyl) on the Chromaticity of White Organic Light-Emitting Devices

Emission Spectra Dependence on Voltage and Emissive Layer Layout in Organic Light-Emitting Diodes

High-efficiency Blue-Emitting Organic Light-Emitting Devices with 4, 4′, 4″-Tris(n-carbazolyl)-triphenylamine As the Hole/exciton-Blocking Layer

Color-tunable Organic Light-Emitting Devices Using a Thin N,N′-bis-(1-naphthyl)-N,N′-diphenyl-1,1′-biphenyl-4,4′-diamine Layer at Heterojunction Interface

Tuning Chromaticity of White Organic Light-emitting Devices with a New Multilayer Structure

Thickness Dependent Emission Color of Organic White Light-Emitting Devices

Electroluminescence of Organic Light-Emitting Diodes with an Ultra-Thin Layer of Dopant

Fabrication and Characterization of Blue Organic Light-emitting Diodes Based on N,N′-bis-(1-naphthyl)-N,N′-biphenyl-1,1′-biphenyl-4,4′-diamine

Effect of 2,9-Dimethyl-4,7-diphenyl-1,10-phenanthroline Outcoupling Layer on Electroluminescent Performances in Top-Emitting Organic Light-Emitting Devices

An Efficient Blue Organic Light Emitting Structure

A Novel Efficient Blue Organic Light Emitting Structure

Bright red-to-yellow organic light-emitting devices based on polarization-induced spectral shifts and broadening.

Voltage Controlled Color Tunable Organic Light-Emitting Diodes

Fine Tuning of the Photophysical and Electroluminescent Properties of DCM-type Dyes by Changing the Structure of the Electron-Donating Group

Influence of doped materials on the performance of blue organic electroluminescent devices

Tuning of Chromaticity in Organic Multiple-Quantum Well White Light Emitting Devices

Energy Distribution in White Organic Light-Emitting Diodes with Three Primary Color Emitting Layers