Abstract:A facile way to fabricate highly efficient organic light emitting devices (OLEDs) with insulator MnO as an electron injecting and transporting material was devised, which eliminates the problem of the oxidation of reactive dopants. The power efficiency of 1.1 lm/W by inserting 3-nm-thick MnO as the electron injecting layer was obtained, higher than the 0.8 lm/W efficiency for the reference device with 0.5-nm-thick LiF. A thermal co-evaporation layer containing 10% weight of MnO and tris(8-hydroxyquinolato) aluminum (Alq(3)) as the electron transporting layer showed more efficient electron transport ability, with turn-on voltage of 3.8 V, lower than 7.4 V for the intrinsic Alq3. Meanwhile, the insertion of thin MnO layer between organic photoactive layer and inorganic metal electrode significantly improved performance and stability of organic solar cell compared to device without it. The power conversion efficiency (PCE) of 2.91% by inserting 3-nm-thick MnO was obtained, higher than the 0.91% efficiency for the device without it, and 2.59% for the device with 0.5-nm-thick LiF. Charge transport of rhenium trioxide (ReO3) in organic electronic devices was investigated. The hole injection/transport was blocked and the electron injection/transport was enhanced with doping of ReO3 in organic electronic devices. Thus the charge balance and efficiency of the OLED were improved, 2.7 cd/A of current efficiency (CE) at 20 mA/cm(2) for the device with ReO3 was higher than 1.5 cd/A for the device without it. In the case of organic photovoltaic cells (OPV), the open-circuit voltage (V-oc), 0.58 V, was higher compared to the device without ReO3 (0.44 V) due to the improvement of interface properties. The PCE was increased to 2.27% by the combination of ReO3 (increasing V-oc) with poly(3,4-ethylene dioxythiophene): poly(styrene-sulfonate) (PEDOT:PSS) (improve hole transport to increase J(sc)) on the modification of the anode, higher than 1.85% for the device without ReO3.

Improved efficiency of organic light-emitting devices employing bathocuproine doped in the electron-transporting layer

Highly Efficient Dual-Dopant Enhanced Emission OLEDs

Organic light-emitting diodes with varying thickness of bathocuproine layer

Highly Efficient Nondoped Green Organic Light-Emitting Diodes with Combination of High Photoluminescence and High Exciton Utilization

Highly Power Efficient Organic Light-Emitting Diodes Based on P-Doped and Novel N-Doped Carrier Transport Layers

Achieving a Significantly Increased Efficiency in Nondoped Pure Blue Fluorescent OLED: A Quasi‐Equivalent Hybridized Excited State

Bipolar TADF Interlayer for High Performance Hybrid WOLEDs with an Ultrathin Non-Doped Emissive Layer Architecture

Organic light-emitting devices with a 2-(4-biphenyl)-5-(4-butylphenyl)-1,3,4-oxadiazole layer between the α-naphtylphenyliphenyl diamine and 8-hydroxyquinoline aluminum

Efficient Single-Active-Layer Organic Light-Emitting Diodes With Fluoropolymer Buffer Layers

P-113: Novel Structure Organic Light-Emitting Diodes with High Performance

Improved Performance of Alq(3)-based Organic Light-Emitting Diode with Multi-Layer Structure

Improving the Efficiency of AlEgen-Based Nondoped Blue Organic Light-Emitting Diode by Rational Isomer Engineering

Highly efficient and bright doped organic electroluminescent diodes using an aluminum electrode

An Efficient Blue Organic Light Emitting Structure

Highly efficient green TADF organic light-emitting diodes by simultaneous manipulating hole and electron transport.

Efficient Organic Light-Emitting Diode Using Lithium Tetra(8-Hydroxy-Quinolinato) Boron As the Electron Injection Layer

Improving working lifetime and efficiency of phosphor doped organic light-emitting diodes

N-Type Doping in Organic Electronic Devices

Efficient Nondoped Organic Light-Emitting Diodes with CuI Complex Emitter

The enhanced electron injection by fluorinated tris-(8-hydroxy-quinolinato) aluminum derivatives in high efficient Si-anode OLEDs

Highly Efficient Blue-Green Organic Light-Emitting Diodes Achieved by Controlling the Anionic Migration of Cationic Iridium(Iii) Complexes