Abstract:The current density-luminance-voltage characteristics of organic light-emitting devices (OLEDs) with N,N′-Bis(naphthalen-1-yl)-N,N′-bis(phenyl) benzidine (NPB) of various thicknesses as the hole transport layer have been investigated. It is found that for conventional structures of indium–tin–oxide/NPB/tris(8-hydroxyquinoline) aluminum (Alq3) (60 nm)/LiF (0.5 nm)/Al the optimal hole injection and luminescence efficiencies appear at NPB thicknesses of 5 and 20 nm, respectively. The large difference between the two optimal thicknesses suggests that the effective block of the NPB layer against electrons from across the Alq3/NPB interface is essential for high-efficiency operation of the OLEDs. The electron blocking effect of NPB is further confirmed by the electroluminescence (EL) behavior of devices with the structure of ITO/NPB(5 nm)/Alq3:4-(dicyanomethylene)-2-methyl-6-(p-dimethylaminostyryl)-4H-pyran (DCM) (30 nm)/NPB/Alq3(60 nm)/LiF(0.5 nm)/Al. The proportion of DCM EL to the whole EL decreases with increasing NPB thickness. This suggests that the NPB layer blocks electron transport to the Alq3:DCM layer. The Förster energy transfer from the 60 nm Alq3 layer to the DCM molecules is ruled out by the EL behavior observed after quenching excitons in the Alq3 layer. The origin of the difference in the optimal N,N′-Bis(3-methylphenyl)-N,N′-bis(phenyl)benzidine (TPD) thicknesses reported by other two different groups is also discussed.

Tungsten Oxide Doped N,N-'-Di(Naphthalen-1-Yl)-N,N-'-Diphenyl-Benzidine As Hole Injection Layer for High Performance Organic Light-Emitting Diodes

Bipolar TADF Interlayer for High Performance Hybrid WOLEDs with an Ultrathin Non-Doped Emissive Layer Architecture

Electron Blocking and Hole Injection: the Role of N,N′-Bis(naphthalen-1-y)-N,N′-bis(phenyl)benzidine in Organic Light-Emitting Devices

Improved performances of the organic light-emitting devices by doping in the mixed layer

P-113: Novel Structure Organic Light-Emitting Diodes with High Performance

Improved Hole Injection And Transport Of Organic Light-Emitting Devices With An Efficient P-Doped Hole-Injection Layer

Performances enhancement in OLEDs by inserting ultrathin trilayer in electron injection structure and using MoO3 as hole buffer layer.

A High Tg Small-Molecule Arylamine Derivative As a Doped Hole-Injection/transport Material for Stable Organic Light-Emitting Diodes

Increased Performance of an Organic Light-Emitting Diode by Employing a Zinc Phthalocyanine Based Composite Hole Transport Layer

Stable Amorphous Bis(diarylamino)biphenyl Derivatives As Hole-Transporting Materials in OLEDs

Influence of PVK:NPB Hole Transporting Layer on Organic Light-Emitting Devices Characteristics

Improvement of the Performances of Organic Light-emitting Devices Using Fe3O4 As P-Dopant

Organic light-emitting diodes with improved hole–electron balance and tunable light emission with aromatic diamine/bathocuproine multiple hole-trapping-layer

Doping in Mixed Layer Can Improve the Performances of Organic Light-Emitting Devices

Efficient Organic Light-Emitting Diode Using Lithium Tetra(8-Hydroxy-Quinolinato) Boron As the Electron Injection Layer

Improving the Performance of Organic Light-emitting Device Using Doped Alq_3 into NPB

A novel organic light-emitting diode by utilizing double hole injection layer

Efficiency Improvement Of Yellow Organic Light-Emitting Devices By Using Mixed Hole Transporting Layer

Phenanthroimidazole-derivative Semiconductors As Functional Layer in High Performance OLEDs

Doping in the Mixed Layer to Achieve High Brightness and Efficiency Organic Light Emitting Devices

Improving the Performance of OLEDs by Using a Low-Temperature-evaporable N-Dopant and a High-Mobility Electron Transport Host.