Abstract:A compact high-power ultra-wideband bipolar pulse generator based on a modified Marx circuit is designed, which is mainly composed of a primary power supply, Marx generator, sharpening and cutoff subnanosecond spark gap switches, and coaxial transmission lines. The Marx generator with modified circuit structure has thirty-two stages and is composed of eight disk-like modules. Each module consists of four capacitors, two spark gap switches, four charging inductors, and a mechanical support. To simplify the design of the charging structure and reduce the number of switches, four groups of inductors are used to charge the capacitors of the Marx generator, two of which are used for positive voltage charging and the other two for negative voltage charging. When the capacitor of each stage is charged to 35 kV, the maximum output peak voltage can reach 1 MV when the Marx generator is open circuit. The high-voltage pulse generated by the Marx generator charges the transmission line and forms a bipolar pulse through sharpening and cutoff switches. All transmission lines used for bipolar pulse generation have an impedance of 10 Ω. When the 950 kV pulse voltage generated by the Marx generator is fed into the transmission line, the bipolar pulse peak voltage can reach 390 kV, the center frequency of the pulse is about 400 MHz, and the output peak power is about 15.2 GW.

Effects of High Power Electromagnetic Pulse Injected from Base on Bipolar Junction Transistor

Damage of Bipolar Junction Transistor under Electromagnetic Pulse Injected from Different Electrode

Transient Response of Bipolar Junction Transistor under Intense Electromagnetic Pulse

Influence of Circuit During Injection of EMP into Bipolar Junction Transitor

Numerical investigation on thermal characteristics of BJTs under the impact of an EMP

Two-Dimensional Numerical Simulation Study on the Synergistic Effects of Transient Ionizing Radiation and Electromagnetic Pulse on Bipolar Junction Transistor

Analysis of the Thermal Effects of Gaasfets under the High-Power Electromagnetic Pulses

Thermal Accumulation Effects on the Transient Temperature Responses in LDMOSFETs Under the Impact of a Periodic Electromagnetic Pulse

Thermal Transient Response Of Gaas Fets Under Intentional Electromagnetic Interference (Iemi)

Heat Effect In A Vertical Grounded-Base Npn Bipolar Junction Transistor Under Esd Stress

Electro-Thermo-Mechanical Characterizations of Various Wire Bonding Interconnects Illuminated by an Electromagnetic Pulse

Transient Electro-Thermo-mechanical Responses of Wire Bonding Interconnects Illuminated by an Electromagnetic Pulse

Electrothermal breakdown of an intentional electromagnetic pulse injected into Ku-band gaas Mesfet-based low noise amplifier(LNA)

Transient Characterization of Power Divider Response Illuminated by a High-Power EMP

A Coupled 3D Finite Element-Circuit Model for the Numerical Analysis of Small Time Scale Transients of an Insulated Gate Bipolar Transistor Power Electronics Device

A Network Topological Approach-Based Transient 3-D Electrothermal Model of Insulated-Gate Bipolar Transistor

Analytical models of the electric field and carrier transit time in the base of bipolar junction transistors

A Compact High-Power Ultra-Wideband Bipolar Pulse Generator

An Experimental And Numerical Investigation Of Igbt Blocking Characteristics

Study on the Effects of Burst Pulse Magnetic Field Interference in IGBT Switching Circuit for High Power Application

Physics-based 3D simulation of single event transient current in GaN high-electron-mobility transistor and super-heterojunction field-effect transistor