Abstract:Presented is a study on the original preparation of individual and in situ intimately mixed composite nanocrystalline powders in the titanium nitride-aluminum nitride system, Ti:Al = 1:1 (at.), which were used in high pressure (7.7 GPa) and high temperature (650 and 1200 °C) sintering with no binding additives for diverse individual and composite nanoceramics. First, variations in precursor processing pathways and final nitridation temperatures, 800 and 1100 °C, afforded a pool of mixed in the nanosized regime cubic TiN (c-TiN) and hexagonal AlN (h-AlN) composite nanopowders both with varying average crystallite sizes. Second, the sintering temperatures were selected either to preserve initial powder nanocrystallinity (650 °C was lower than both nitridation temperatures) or promote crystal growth and recrystallization (1200 °C was higher than both nitridation temperatures). Potential equilibration towards bimetallic compounds upon solution mixing of the organometallic precursors to nanopowders, monomeric Ti[N(CH3)2]4 and dimeric {Al[N(CH3)2]3}2, was studied with 1H and 13C NMR in C6D6 solution. The powders and nanoceramics, both of the composites and individual nitrides, were characterized if applicable by powder XRD, FT-IR, SEM/EDX, Vicker's hardness, and helium density. The Vicker's hardness tests confirmed many of the composite and individual nanoceramics having high hardnesses comparable with those of the reference h-AlN and c-TiN ceramics. This is despite extended phase segregation and, frequently, closed microsized pore formation linked mainly to the AlN component. No evidence was found for metastable alloying of the two crystallographically different nitrides under the applied synthesis and sintering conditions. The high pressure and high temperature sintering of the individual and in situ synthesis-mixed composite nanopowders of TiN-AlN was demonstrated to yield robust nanoceramics.

Preparation of Nanostructured Cr1−xTixN Ceramics by Spark Plasma Sintering and Their Properties

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Effect of nano-TiC addition on sinterability and mechanical properties of TiC high temperature ceramics

Preparation of Ti1−zNbzN ceramics by spark plasma sintering Ti1−zNbzOxNy nanopowders

Spark plasma sintering of TiN ceramics codoped with SiC and CNT

Preparation and Properties of Nano-Sic-Based Ceramic Composites Containing Nano-Tin

Preparation of nano-TiN powders by Ni-catalysed carbothermal reduction nitridation

Influence of Conductive Nano-Tic on Microstructural Evolution of Si3n4-Based Nanocomposites in Spark Plasma Sintering

Microstructure and Mechanical Properties of TiN/Si3N4 Nanocomposites by Spark Plasma Sintering (SPS)

The spark plasma sintering of fine grained TiCN-Mo-Ni cermets

Preparation of high-entropy nitride ceramics (TiVCrNbZr1-x)Ny by introducing nitrogen vacancies

Sintering Behavior, Microstructure and Mechanical Properties of Silicon Carbide Ceramics Containing Different Nano-Tin Additive

Effects of Ti(C, N) addition on the microstructure and mechanical properties of spark plasma sintered Si3N4/Ti(C, N) ceramic tool material

Synthesis of Nanocrystalline Titanium Nitride Powders by Direct Nitridation of Titanium Oxide

Synthesis of Nanopowders of Titanium Nitride by In-Situ Nitridation of Titanium Oxide

Composite Nitride Nanoceramics in the System Titanium Nitride (TiN)-Aluminum Nitride (AlN) through High Pressure and High Temperature Sintering of Synthesis-Mixed Nanocrystalline Powders

Densification, Microstructures, and Mechanical Properties of (zr, Ti)(C, N) Ceramics Fabricated by Spark Plasma Sintering

In-situ synthesized phases during the spark plasma sintering of g-C3N4 added TiB2 ceramics: A thermodynamic approach

Preparation for BaTiO3 Nano-crystalline Powder and Study on the Sintering Characteristics of Ceramic

A microstructural approach to the chemical reactions during the spark plasma sintering of novel TiC–BN ceramics

Microstructure and Properties of TiN-reinforced W–Ti Alloys Prepared by Spark Plasma Sintering