Abstract:SiC/SiC composites in aerospace applications are exposed to a variety of thermal conditions, in particular, thermal stress due to rapid heating and cooling. Therefore, it is crucial to investigate and evaluate the resistance of SiC/SiC composites to repeated temperature cycling. This paper investigates the evolution of properties and damage mechanisms of 2D and 2.5D SiC/SiC composites after different thermal shock cycles at 1300 °C. It was found that SiC/SiC composites exhibit a temporary weight increase at the beginning of the thermal shock cycle. Subsequently, the weight decreases and stabilizes as the number of thermal shocks increases. After 10–30 thermal shocks at 1300 °C, the density of SiC/SiC composites decreases while the porosity increases. The fracture behavior of SiC/SiC composites remains the same as that of the initial composites, with 2D SiC/SiC composites exhibiting pseudo-tough fracture and 2.5D SiC/SiC composites exhibiting brittle fracture. The residual strength of the SiC/SiC composites decreased slightly while the residual modulus remained stable. This is related to the reaction of the SiC, and BN with water and oxygen at high-temperature. The thermal shock damage of SiC/SiC composites is anisotropic and is influenced by the structure of the fiber preforms. This is due to the difference in thermal expansion coefficients of the components within the composites and the structural properties of the fiber preforms.

Study on Evolution of Microstructure and Phases in Si/SiC Composites During High Temperature Heat Treatment

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Crystallization Behavior of Amorphous Si2bc3n Ceramic Monolith Subjected to High Pressure

Phase evolution mechanism of SiC-Al-Si composite under flowing nitrogen at 1600 °C

Microstructure evolution and thermal conductivity of diamond/SiC composites after heat treatment

The fiber structure evolution and performance changes of SiC–ZrC fibers after 1600 °C heat treatment

Phase evolution and oxidation resistance of Si3N4/HfB2/HfB C N1–– ceramic nanocomposites prepared from tailored preceramic polymers

Thermal stability of CVI and RMI SiC/SiC composites adopting Cansas 3303 SiC fibers

High-temperature tensile behavior of 3D SiC/SiC composites

Effect of long-time annealing at high temperature on the microstructure and mechanical properties of different types of SiC fibers

Effect of Initial Phase Composition on the Phase Composition, Microstructure, and Mechanical Properties of Si3N4 Ceramics

Effects of Heat-Treatment on the Microstructure, Electromagnetic Wave Absorbing Properties, and Mechanical Properties of SiCN Fibers

Microstructure Evolution of the Interface in SiCf/TiC-Ti3SiC2 Composite under Sequential Xe-He-H Ion Irradiation and Annealing Process

High-temperature Deformation Behavior of SiC-AlN Ceramic Alloys with Fine-grained Microstructure.

Study on the oxidation mechanism of Al-SiC composite at elevated temperature

Properties evolution and damage mechanism of SiC/SiC composites after thermal shock at 1300 °C

Hot strength and microstructure of β-sialon-Al2O3-SiC composites

Structural evolution and mechanical properties of Cansas-III SiC fibers after thermal treatment up to 1700 °C

Effect of metal phases on microstructure and mechanical properties of Si3N4-based ceramic tool materials by microwave sintering

High-Temperature Properties of SiC-Si3N4 Particle Composites

Effect of heat treatment on the microstructure and ablation performance of C/C–SiC composites containing ZrSi 2 –Si