Abstract:A new type of skin–core structure SiC ceramic fibers was prepared from polycarbosilane by employing the curing process of alternating air and vacuum atmosphere periodically at thermal oxidation temperature. High-temperature degradation characteristics and mechanism of the skin–core structure SiC fibers were investigated at temperature from 1473 to 1773 K in air and nitrogen atmosphere, respectively. The ceramic fibers took place passive oxidation reaction in air atmosphere and underwent active oxidation in nitrogen. The main crystal phase of the high-temperature-treated ceramic fibers in air was α -cristobalite. By contrast, the α -cristobalite and β -SiC phases can be detected in nitrogen atmosphere. Compared with traditional fine diameter SiC ceramic fibers, this novel skin–core structure made the SiC ceramic fibers form thinner ring-like layer in nitrogen which was beneficial to the integrity of microstructure and retain strength. The surface defect which was formed by high-temperature exposure had significant influence on mechanical performance. The ceramic fibers lost the strength completely at 1673 K under air atmosphere, while the strength can still be maintained about 0.48 ± 0.06 GP at 1773 K in nitrogen. The skin–core structure was conducive to maintaining the high-temperature mechanical properties in oxygen-free atmosphere.

Structural evolution and mechanical properties of Cansas-III SiC fibers after thermal treatment up to 1700 °C

Mechanical properties and microstructural evolution of Cansas-III SiC fibers after thermal exposure in different atmospheres

Thermal stability of CVI and RMI SiC/SiC composites adopting Cansas 3303 SiC fibers

Microstructural Evolution and Phase Transformation of Cansas 3303 SiC Fibers During Thermal Shock at 1200°C

The fiber structure evolution and performance changes of SiC–ZrC fibers after 1600 °C heat treatment

Effect of heat treatment on the microstructure and properties of CVD SiC fiber

Effect of long-time annealing at high temperature on the microstructure and mechanical properties of different types of SiC fibers

High-temperature tensile behavior of 3D SiC/SiC composites

Mechanical properties and microstructure evolution of 3D C f /SiBCN composites at elevated temperatures

Thermal Expansion Behavior of Carbon Fiber Reinforced Chemical-Vapor-infiltrated Silicon Carbide Composites from Room Temperature to 1400 °C

Experimental Study of High-Temperature Tensile Mechanical Properties of 3D Needled C/C–SiC Composites

The Effect of Heat Treatment on the Properties of SiCf/SiC Composites Prepared with Different SiC Fibers

Effects of Heat-Treatment on the Microstructure, Electromagnetic Wave Absorbing Properties, and Mechanical Properties of SiCN Fibers

Study of SiC fiber axial compressive behavior using tensile recoil measurement

Evolution of microstructure and mechanical properties of SiCf/SiC composites induced by He ions irradiation at various temperatures

Tensile Mechanical Behavior and Failure Mechanism of a Plain-Woven SiCf/SiC Composites at Room and Elevated Temperatures

Tensile Properties of Two-Dimensional Carbon Fiber Reinforced Silicon Carbide Composites at Temperatures Up to 2300 °C

Experimental Study on Thermal Transport Property of KD-II SiC Fiber

Tensile Properties of Two-Dimensional Carbon Fiber Reinforced Silicon Carbide Composites at Temperatures Up to 1800 °C in Air

Preparation and high-temperature properties of skin–core structure SiC ceramic fibers

Residual stress variation in SiCf/SiC composite during heat treatment and its effects on mechanical behavior