Abstract:The stress state is a crucial parameter for the design of innovative microelectromechanical systems based on silicon carbide (SiC) material. Hence, mechanical properties of such structures highly depend on the fabrication process. Despite significant progresses in thin-film growth and fabrication process, monitoring the strain of the suspended SiC thin-films is still challenging. However, 3C-SiC membranes on silicon (Si) substrates have been demonstrated, but due to the low quality of the SiC/Si heteroepitaxy, high levels of residual strains were always observed. In order to achieve promising self-standing films with low residual stress, an alternative micromachining technique based on electrochemical etching of high quality homoepitaxy 4H-SiC layers was evaluated. This work is dedicated to the determination of their mechanical properties and more specifically, to the characterization of a 4H-SiC freestanding film with a circular shape. An inverse problem method was implemented, where experimental results obtained from bulge test are fitted with theoretical static load-deflection curves of the stressed membrane. To assess data validity, the dynamic behavior of the membrane was also investigated: Experimentally, by means of laser Doppler vibrometry (LDV) and theoretically, by means of finite element computations. The two methods provided very similar results since one obtained a Young's modulus of 410 GPa and a residual stress value of 41 MPa from bulge test against 400 GPa and 30 MPa for the LDV analysis. The determined Young's modulus is in good agreement with literature values. Moreover, residual stress values demonstrate that the fabrication of low-stressed SiC films is achievable thanks to the micromachining process developed.

Internal Stress Measurement of LPCVD Silicon Nitride Deposited on Different Substrates

Synthesis and Characterization of LPCVD Polysilicon and Silicon Nitride Thin Films for MEMS Applications

Study of Local Stress Using Stress-Absorbing Si Diaphragm

Study on the Mechanism and Measurement of Stress of Tio2 and Sio2 Thin-Films

Evaluating Interface Effect On Stresses In Thin Films By A Local Curvature Metrology With High Accuracy And Resolution

Ultra-sensitive, Highly Reproducible Film Stress Characterization Using Flexible Suspended Thin Silicon Plates and Local Curvature Measurements

Modifying Residual Stress and Stress Gradient in LPCVD SI3N 4 Film with Ion Implantation

Residual Stress in Sputtered Silicon Oxycarbide Thin Films

Spectroscopic Analysis of Film Stress Mechanism in PECVD Silicon Nitride

On the Fracture Toughness Measurement of Thin Film Coated Silicon Wafers

A Novel Approach to Study Patterned Thin Film Local Stress for Microelectronics Application

Substrate-Induced Stress In Silicon Nanocrystal/Sio2 Multilayer Structures

Measurements of Residual Stresses in Al Film/silicon Nitride Substrate Microcantilever Beam Systems

Characterization of the Young's Modulus and Residual Stresses for a Sputtered Silicon Oxynitride Film Using Micro-Structures

Investigation of the Young's Modulus and the Residual Stress of 4H-SiC Circular Membranes on 4H-SiC Substrates

Stress-Dependent Optical Extinction in LPCVD Silicon Nitride Measured by Nanomechanical Photothermal Sensing

Methods of producing plasma enhanced chemical vapor deposition silicon nitride thin films with high compressive and tensile stress

Measurement and analysis of residual stress in the body of silicon carbide mirror during optical fabrication

Fabricating Processes of Free-Standing Silicon Nitride Thin Film for MEMS Devices

Stress Control and Anti-erosion Characteristics of PECVD SiC Thin Film