Abstract:Low-thermal-budget, electrically active, and thick polysilicon films are necessary for building a microelectromechanical system (MEMS) on top of a complementary metal oxide semiconductor (CMOS). However, the formation of these polysilicon films is a challenge in this field. Herein, for the first time, the development of in situ phosphorus-doped silicon films deposited under ultrahigh-vacuum conditions (~10-9 Torr) using electron-beam evaporation (UHVEE) is reported. This process results in electrically active, fully crystallized, low-stress, smooth, and thick polysilicon films with low thermal budgets. The crystallographic, mechanical, and electrical properties of phosphorus-doped UHVEE polysilicon films are studied. These films are compared with intrinsic and boron-doped UHVEE silicon films. Raman spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM) and atomic force microscopy (AFM) are used for crystallographic and surface morphological investigations. Wafer curvature, cantilever deflection profile and resonance frequency measurements are employed to study the mechanical properties of the specimens. Moreover, resistivity measurements are conducted to investigate the electrical properties of the films. Highly vertical, high-aspect-ratio micromachining of UHVEE polysilicon has been developed. A comb-drive structure is designed, simulated, fabricated, and characterized as an actuator and inertial sensor comprising 20-μm-thick in situ phosphorus-doped UHVEE films at a temperature less than 500 °C. The results demonstrate for the first time that UHVEE polysilicon uniquely allows the realization of mechanically and electrically functional MEMS devices with low thermal budgets.

Sub-micron Silicon Epilayer Deposited by a Novel Ultrahigh Vacuum Chemical Deposition System and Fabrication of High Frequency Device

Fabrication of Schottky Barrier Diodes of High Frequency Based on Thin Silicon Epilayer

Ultrahigh vacuum chemical vapor deposition system and its application to growth of nMOSFET and HBT structures

Homoepitaxial Chemical Vapor Deposition of up to 150 μm Thick 4H-SiC Epilayers in a 10×100 mm Batch Reactor

Doping And Growth Of Thin Si Epilayer And Sige By Uhv/Cvd

Electrical Characteristics and Selective Growth of SiGe by Ultrahigh Vacuum Chemical Vapor Deposition

Study of Si Epitaxy on Porous Si by Ultrahigh Vacuum Chemical Vapor Deposition

Epitaxial Growth of High-Quality Silicon Films on Double-Layer Porous Silicon

An Ultrahigh Vacuum Chemical Vapor Deposition System and Si, GeSi Epitaxy on a Three-Inch Si Wafer

Epitaxial Growth of SiC Epilayers for 10kv Schottky Diodes Using Chloride-Based CVD

Fabrication of 1nm/s High Deposition Microcrystalline Silicon and Its Application in Solar Cells

High-Quality 4H-SiC Homogeneous Epitaxy via Homemade Horizontal Hot-Wall Reactor

High-Rate Deposition of Microcrystalline Silicon Thin Film by Multi-Step Method

Characterization and growth of germanium-silicon epitaxial layers by UHV/CVD

Epitaxial Ge thin film Growth on Si Using a Cost-Effective Process in Simplified CVD Reactor

Super High Speed Polysilicon Emitter Integrated Circuit Technology

Low-thermal-budget electrically active thick polysilicon for CMOS-First MEMS-last integration

Electric Double Layer Effect in a Nano-Scale SiO2sacrificial Layer Etching Process and Its Application in Nanowire Fabrication

High-quality germanium growth on (111)-faceted V-groove silicon by molecular beam epitaxy

High Rate Deposition of Microcrystalline Silicon Films Using Jet-Type Inductively Coupled Plasma Chemical Vapor Deposition

Silicon microstructure processing method based on femtosecond laser treatment and wet etching