Abstract:The abrasion mechanism in solid-solid contact mode of the chemical mechanical polishing (CMP) process is investigated in detail. Based on assumptions of plastic contact over wafer-abrasive and pad-abrasive interfaces, the normal distribution of abrasive size and an assumed periodic roughness of pad surface, a novel model is developed for material removal in CMP. The basic model is MMR = rho (w)NVol(removed), where rho (w) is the density of wafer, N the number of active abrasives, and Vol(removed) the volume of material removed by a single abrasive. The model proposed integrates process parameters including pressure and velocity and other important input parameters including the wafer hardness, pad hardness, pad roughness, abrasive size, and abrasive geometry into the same formulation to predict the material removal rate (MRR). An interface between the chemical effect and mechanical effect has been constructed through a fitting parameter H-w, "dynamical" hardness value of the wafer surface, in the model. It reflects the influences of chemicals on the mechanical material removal. The fluid effect in the current model is attributed to the number of active abrasives. It is found that the nonlinear down pressure dependence of material removal rate is related to a probability density function of the abrasive size and the elastic deformation of the pad. Compared with experimental results, the model accurately predicts MRR. With further verification of the model, a better understanding of the fundamental mechanism involved in material removal in the CMP process, particularly different roles played by the consumables and their interactions, can be obtained.

Influence of Process Parameters on Material Removal Rate of Hard Disk in Chemical Mechanical Polishing

Chemical-Mechanical Polishing of NiP Alloy for Hard Disk Drive Substrates

Influence of Slurry Ingredients as Particle on Hard Disk Substrate Polishing

Chemical Mechanical Polishing of Computer Hard Disk Substrate in Colloidal Sio2 Slurry

Preparation of Nanometer SiO2 Slurry and its Polishing Performance on Disk CMP

Influence of Slurry as pH Value on Chemical Mechanical Polishing of Glass Substrate for Hard Disks

Influences of Slurry Ingredients on Super-Smooth Surface Polishing of Hard Disk Substrate

CMP of hard disk substrate using a colloidal SiO2 slurry: preliminary experimental investigation

Chemical Mechanical Polishing of Glass Disk Substrates: Preliminary Experimental Investigation

Progress in Material Removal Mechanisms of Surface Polishing with Ultra Precision

Effect of Ingredients in Slurry Containing Alumina on Polishing of Hard Disk Substrate

Investigations on process parameters of cluster magnetorheological polishing in a planet motion model

Chemical mechanical polishing of hard disk substrate with α-alumina-g-polystyrene sulfonic acid composite abrasive

An Investigation on the Chemical Effect in Chemo-Mechanical Polishing

Effect of Process Parameters on Material Removal Rate in Chemical Mechanical Polishing of 6H-SiC(0001)

Research on the key technology for processing efficiency improvement of aluminum alloy mirror chemical mechanical polishing

Effects of Nano-Scale Particles in Chemical Mechanical Polishing Process

Effect of ingredients in slurry containing alumina on chemical mechanical polishing of hard disc substrates

Material removal rate model for chemical–mechanical polishing of single-crystal SiC substrates using agglomerated diamond abrasive

Material Removal Mechanism in Chemical Mechanical Polishing: Theory and Modeling

Mechanical Model of Nanoparticles for Material Removal in Chemical Mechanical Polishing Process