Abstract:Abstract With the development of integrated circuit technology, especially after entering the sub-micron process, the reduction of critical dimensions and the realization of high-density devices, the flatness between integrated circuit material layers is becoming more and more critical. Because conventional mechanical polishing methods inevitably produce scratches of the same size as the device in metal or even dielectric layers, resulting in depth of field and focus problems in lithography. The first planarization technique to achieve application is spin on glass (SOG) technology. However, this technology will not only introduce new material layers, but will also fail to achieve the global flattening required by VLSI and ULSI technologies. Moreover, the process instability and uniformity during spin coating do not meet the high flatness requirements of the wafer surface. Also, while some techniques such as reverse etching and glass reflow can achieve submicron level regional planarization. After the critical dimension reaches 0.35 microns (sub-micron process), the above methods cannot meet the requirements of lithography and interconnect fabrication. In the 1980s, IBM first introduced the chemical mechanical polishing (CMP) technology used to manufacture precision optical instruments into its DRAM manufacturing [1]. With the development of technology nodes and critical dimensions, CMP technology has been widely used in the Front End Of Line (FEOL) and Back End Of Line (BEOL) processes [2]. Since the invention of chemical mechanical polishing, scientists have not stopped studying its internal mechanism. From the earliest Preston Formula (1927) to today’s wafer scale, chip scale, polishing pad contact, polishing pad - abrasive - wafer contact and material removal models, there are five different scale models from macro to the micro [3]. Many research methods, such as contact mechanics, multiphase flow kinetics, chemical reaction kinetics, molecular dynamics, etc., have been applied to explain the principles of chemical mechanical polishing to establish models. This paper mainly introduces and summarizes the different models of chemical mechanical polishing technology. The various application scenarios and advantages and dis-advantages of the model are discussed, and the development of modeling technology is introduced.

Chemical Mechanical Polishing of Glass Disk Substrates: Preliminary Experimental Investigation

Chemical Mechanical Polishing on Extremely Low Expansion Glass Ceramic Wafers

Chemical Mechanical Polishing of Computer Hard Disk Substrate in Colloidal Sio2 Slurry

Preparation of α-alumina/polymethacrylic acid composite abrasive and its CMP performance on glass substrate

Mechanism and Applications of Chemical and Mechanical Polishing

Influence of Slurry as pH Value on Chemical Mechanical Polishing of Glass Substrate for Hard Disks

Investigation on Nanoscale Material Removal Process of BK7 and Fused Silica Glass During Chemical‐mechanical Polishing

Progress in Material Removal Mechanisms of Surface Polishing with Ultra Precision

Review on modeling and application of chemical mechanical polishing

Polishing Properties of Porous Silica Abrasive on Hard Disk Substrate CMP

Chemical mechanical polishing: Theory and experiment

Study on Lubricating Behavior in Chemical Mechanical Polishing

Chemical-Mechanical Polishing of NiP Alloy for Hard Disk Drive Substrates

Influence of Process Parameters on Material Removal Rate of Hard Disk in Chemical Mechanical Polishing

Design of Composite Abrasives and Substrate Materials for Chemical Mechanical Polishing Applications

Analysis on Pad Effects in Chemical Mechanical Polishing

Research on the key technology for processing efficiency improvement of aluminum alloy mirror chemical mechanical polishing

Impact of Pad–Wafer Contact Area in Chemical Mechanical Polishing

Improvement and Application of Pad Conditioning Accuracy in Chemical Mechanical Polishing

The Effect of the Interface Reaction Mode on Chemical Mechanical Polishing

The Deterioration Characteristics and Mechanism of Polishing Pads in Chemical Mechanical Polishing of Fused Silica