Abstract:The abrasion mechanism in solid-solid contact mode of the chemical mechanical polishing (CMP) process is investigated in detail. Based on assumptions of plastic contact over wafer-abrasive and pad-abrasive interfaces, the normal distribution of abrasive size and an assumed periodic roughness of pad surface, a novel model is developed for material removal in CMP. The basic model is MMR = rho (w)NVol(removed), where rho (w) is the density of wafer, N the number of active abrasives, and Vol(removed) the volume of material removed by a single abrasive. The model proposed integrates process parameters including pressure and velocity and other important input parameters including the wafer hardness, pad hardness, pad roughness, abrasive size, and abrasive geometry into the same formulation to predict the material removal rate (MRR). An interface between the chemical effect and mechanical effect has been constructed through a fitting parameter H-w, "dynamical" hardness value of the wafer surface, in the model. It reflects the influences of chemicals on the mechanical material removal. The fluid effect in the current model is attributed to the number of active abrasives. It is found that the nonlinear down pressure dependence of material removal rate is related to a probability density function of the abrasive size and the elastic deformation of the pad. Compared with experimental results, the model accurately predicts MRR. With further verification of the model, a better understanding of the fundamental mechanism involved in material removal in the CMP process, particularly different roles played by the consumables and their interactions, can be obtained.

An Investigation on the Chemical Effect in Chemo-Mechanical Polishing

Non-continuum Material Removal Mechanism of Surface Polishing with Ultra Precision

A chemical mechanical polishing model incorporating both the chemical and mechanical effects

Modeling the microscale contact status in chemical mechanical polishing process

A Model for Mechanical Wear and Abrasive Particle Adhesion during the Chemical Mechanical Polishing Process

Effects of Nano-Scale Particles in Chemical Mechanical Polishing Process

A plasticity-based model of material removal in chemical-mechanical polishing (CMP)

An Empirical Approach to Explain the Material Removal Rate for Copper Chemical Mechanical Polishing

Material Removal Mechanism in Chemical Mechanical Polishing: Theory and Modeling

Mechanical Model of Nanoparticles for Material Removal in Chemical Mechanical Polishing Process

Material Removal Regions in Chemical Mechanical Polishing: Coupling Effects of Slurry Chemicals, Abrasive Size Distribution and Wafer-Pad Contact Area, Part 1

Molecular Modeling of the Mechanical Effect in the Chemical Mechanical Polishing Process

Effect of pH on Material Removal Rate of Cu in Abrasive-Free Polishing

Mechanism and Applications of Chemical and Mechanical Polishing

Chemical mechanical polishing: Theory and experiment

Investigation of Polisher Head and Slurry Sweep Effect in Oxide Film Polishing

A Coupled Material Removal Model for Chemical Mechanical Polishing Processes

Chemical effect on the material removal rate in the CMP of silicon wafers

Effects of abrasive size distribution in chemical mechanical planarization: Modeling and verification

Influence of Process Parameters on Material Removal Rate of Hard Disk in Chemical Mechanical Polishing

Mechanical Model of Single Abrasive During Chemical Mechanical Polishing: Molecular Dynamics Simulation