Abstract:In this work, surface analysis technology is employed to investigate the removal mechanism and the selection of abrasive during fused silica chemical mechanical polishing (CMP). Morphology of abrasives is inspected by scanning electron microscope (SEM). The atomic force microscope (AFM) is used to determine the surface roughness (Rq) and undulating (PV) of the polished fused silica surface. The results show that abrasive morphology has a tremendous influence on removal rate (MRR) and PV but has little effect on the Rq. The AFM and infrared spectroscopy (IR) analysis show that a soft layer, called “silica gel membrane (SGM),” existed on the polished surface is the critical reason for the differences of MRR, Rq, and PV during CMP. For three kinds of micro-ceria abrasives, the abrasive with a rougher surface gets more opportunities to contact the surface of fused silica, yielding higher MRR. Regarding different kinds of nano-abrasives, there are more SGM induced by nano-ceria abrasive resulting from higher chemical reaction rate. The element contaminations on the polished fused silica have been assessed using X-ray photoelectron spectroscopy (XPS), and the results suggest that there are depths of 3.6 and 5.4-nm element contaminations on the polished surface of fused silica with nano-ceria and nano-alumina abrasives, respectively. While the surface polished by nano-silica is free of heterogeneous element contaminations. Based on study results, a novel polishing slurry is designed by modifying the chemical composition of nano-silica. Comparing with ceria-based slurry, the silica-based slurry has better removal efficiency, and surface quality in fused silica precision machining. © 2019 John Wiley & Sons, Ltd.

Non-continuum Material Removal Mechanism of Surface Polishing with Ultra Precision

A chemical mechanical polishing model incorporating both the chemical and mechanical effects

A Coupled Material Removal Model for Chemical Mechanical Polishing Processes

Mechanical Model of Nanoparticles for Material Removal in Chemical Mechanical Polishing Process

A Chemical Mechanical Polishing Model Based on the Viscous Flow of the Amorphous Layer

Progress in Material Removal Mechanisms of Surface Polishing with Ultra Precision

Material Removal Mechanism in Chemical Mechanical Polishing: Theory and Modeling

Molecular Modeling of the Mechanical Effect in the Chemical Mechanical Polishing Process

A plasticity-based model of material removal in chemical-mechanical polishing (CMP)

Investigation of Material Removal Mechanism of Silicon Wafer in the Chemical Mechanical Polishing Process Using Molecular Dynamics Simulation Method

A Theoretical Model Incorporating Both the Nano-Scale Material Removal and Wafer Global Uniformity During Planarization Process

Surface Morphology Evolution during Chemical Mechanical Polishing Based on Microscale Material Removal Modeling for Monocrystalline Silicon

Material Removal Regions in Chemical Mechanical Planarization for Submicron Integrated Circuit Fabrication: Coupling Effects of Slurry Chemicals, Abrasive Size Distribution,and Wafer-Pad Contact Area

Mechanism and Applications of Chemical and Mechanical Polishing

Material Removal Regions in Chemical Mechanical Polishing: Coupling Effects of Slurry Chemicals, Abrasive Size Distribution and Wafer-Pad Contact Area, Part 1

XPS, UV–vis Spectroscopy and AFM Studies on Removal Mechanisms of Si-face SiC Wafer Chemical Mechanical Polishing (CMP)

A Model for Mechanical Wear and Abrasive Particle Adhesion during the Chemical Mechanical Polishing Process

Application of surface analysis in study on removal mechanism and abrasive selection during fused silica chemical mechanical polishing

Modeling the microscale contact status in chemical mechanical polishing process

Material Removal Mechanism of Copper CMP from a Chemical–Mechanical Synergy Perspective

Modeling and Experimental Analysis of the Material Removal Rate in the Chemical Mechanical Planarization of Dielectric Films and Bare Silicon Wafers