Abstract:The abrasion mechanism in solid-solid contact mode of the chemical mechanical polishing (CMP) process is investigated in detail. Based on assumptions of plastic contact over wafer-abrasive and pad-abrasive interfaces, the normal distribution of abrasive size and an assumed periodic roughness of pad surface, a novel model is developed for material removal in CMP. The basic model is MMR = rho (w)NVol(removed), where rho (w) is the density of wafer, N the number of active abrasives, and Vol(removed) the volume of material removed by a single abrasive. The model proposed integrates process parameters including pressure and velocity and other important input parameters including the wafer hardness, pad hardness, pad roughness, abrasive size, and abrasive geometry into the same formulation to predict the material removal rate (MRR). An interface between the chemical effect and mechanical effect has been constructed through a fitting parameter H-w, "dynamical" hardness value of the wafer surface, in the model. It reflects the influences of chemicals on the mechanical material removal. The fluid effect in the current model is attributed to the number of active abrasives. It is found that the nonlinear down pressure dependence of material removal rate is related to a probability density function of the abrasive size and the elastic deformation of the pad. Compared with experimental results, the model accurately predicts MRR. With further verification of the model, a better understanding of the fundamental mechanism involved in material removal in the CMP process, particularly different roles played by the consumables and their interactions, can be obtained.

Mechanical Model of Single Abrasive During Chemical Mechanical Polishing: Molecular Dynamics Simulation

A Model for Mechanical Wear and Abrasive Particle Adhesion during the Chemical Mechanical Polishing Process

A chemical mechanical polishing model incorporating both the chemical and mechanical effects

Mechanical Model of Nanoparticles for Material Removal in Chemical Mechanical Polishing Process

A plasticity-based model of material removal in chemical-mechanical polishing (CMP)

Material Removal Mechanism in Chemical Mechanical Polishing: Theory and Modeling

A Coupled Material Removal Model for Chemical Mechanical Polishing Processes

Reactive Molecular Dynamics Simulation of Si Chemical Mechanical Polishing Process

A Chemical Mechanical Polishing Model Based on the Viscous Flow of the Amorphous Layer

Surface Morphology Evolution during Chemical Mechanical Polishing Based on Microscale Material Removal Modeling for Monocrystalline Silicon

A model for chemical–mechanical polishing of a material surface based on contact mechanics

Molecular Modeling of the Mechanical Effect in the Chemical Mechanical Polishing Process

Investigation of Material Removal Mechanism of Silicon Wafer in the Chemical Mechanical Polishing Process Using Molecular Dynamics Simulation Method

Simulation of abrasive polishing process of single crystal silicon based on molecular dynamics

Modeling Chemical Mechanical Polishing with Couple Stress Fluids

Wear phenomena in chemical mechanical polishing

A Contact-Mechanics-Based Model For General Rough Pads In Chemical Mechanical Polishing Processes

Modeling the microscale contact status in chemical mechanical polishing process

Non-continuum Material Removal Mechanism of Surface Polishing with Ultra Precision

Contribution of Porous Pad to Chemical Mechanical Polishing

Characterization of Pad–Wafer Contact Area and Distance in Chemical-Mechanical Polishing