Abstract:Considering the technical status and existing problems of traditional silicon wafer chemical mechanical polishing (CMP), especially for the diameter of silicon wafer increasing, constantly, the surface quality and efficiency of silicon wafer polishing are becoming an urgent problem to be solved, so the research subject of ultrasonic vibration hybrid polishing new technique was proposed. By means of mechanism theoretical analysis research, firstly, the processing mechanism of hybrid polishing was studied systematically. An investigation of polishing mechanisms based on the micro-contact model between the polishing pad and the polishing surface of silicon wafer was developed. Polishing mechanism theoretical analysis shows that when ultrasonic vibrations combined with mechanical and chemical, the performance of polishing slurry is improved in the process of CMP, therefore to create favorable conditions. To verify the established theory, then, a series of experiments to investigate the traditional CMP are conducted, as well as the polishing tool with the forms of ultrasonic vibration, the polishing pad, the polishing surface quality, velocity at polishing point v, and slurry supplying Q on silicon wafer polishing. Experiment findings showed that, in the same polishing conditions, especially, hybrid polishing by ultrasonic-elliptic-vibration has gained more advantage over the effect of silicon wafer polishing. When ultrasonic-elliptic-vibration is put in polishing tool, the silicon wafer polished surface roughness Ra from the traditional method of polishing 0.077μm going down to the 0.042μm, the no-smooth rate KR which describes the polished surface morphology is significantly improved, and the material removal rate increases by 18%. Experimental research findings of the surface quality and the material removal mechanism are shown to be consistent with the theoretical analysis.

Investigation of Polisher Head and Slurry Sweep Effect in Oxide Film Polishing

Investigating the Impact of Pad Groove Depth Reduction on Process Variation in Oxide Chemical Mechanical Polishing

Analysis on Pad Effects in Chemical Mechanical Polishing

Electrochemical Analysis of the Slurry Composition for Chemical Mechanical Polishing of Flexible Stainless-Steel Substrates

Micro-Polar Effects of Flow Features of Slurries in Chemical Mechanical Polishing Process

Investigation of thermal effects in copper chemical mechanical polishing

Mechanism and Applications of Chemical and Mechanical Polishing

XPS, UV–vis Spectroscopy and AFM Studies on Removal Mechanisms of Si-face SiC Wafer Chemical Mechanical Polishing (CMP)

High-performance chemical mechanical polishing slurry for aluminum alloy using hybrid abrasives of zirconium phosphate and alumina

Chemical mechanical polishing: Theory and experiment

Effects of Nano-Scale Particles in Chemical Mechanical Polishing Process

Chemical Mechanical Polishing of Aluminum Alloys using Alumina-Based Slurry

Slurry components in metal chemical mechanical planarization (CMP) process: A review

The Deterioration Characteristics and Mechanism of Polishing Pads in Chemical Mechanical Polishing of Fused Silica

Mechanical aspects of the chemical mechanical polishing process: A review

Analysis of removal mechanism on oxide CMP using mixed abrasive slurry

Application of surface analysis in study on removal mechanism and abrasive selection during fused silica chemical mechanical polishing

Mechanism and Experimental Investigation on Silicon Wafer Hybrid Polishing by Ultrasonic-Elliptic-Vibration Chemical-Mechanical

Study on Optimum Process of CMP

Recent developments and applications of chemical mechanical polishing

Wear phenomena in chemical mechanical polishing